Gyroid Cones for Head(amame) Headphones - Dual Extruder Files
por DaveMakesStuff en Thangs
This custom set of cones is compatible with the open-sourced Head(amame) Headphones V2.
Thangs entrega los archivos a usuarios con cuenta gratuita
Licencia
Solo uso personalCC BY-NC-SA 4.0 — Atribución, no comercial, compartir igual
Uso personal dando crédito; sin fines comerciales y las modificaciones con la misma licencia.
Al descargar aceptas respetar la licencia y dar crédito a DaveMakesStuff.
Archivos (10)
- Gyroid Cone Top - Infill.stl STL · 14,6 MB
- Gyroid Cone Top - Shell.stl STL · 7,3 MB
- Gyroid Headband Attachment - Infill.stl STL · 8,5 MB
- Gyroid Headband Attachment - Shell.stl STL · 4,9 MB
- Gyroid Cone Bottom Left - Infill.stl STL · 13,7 MB
- Gyroid Cone Bottom Left - Shell.stl STL · 8,5 MB
- Gyroid Cone Bottom Right no Mic - Infill.stl STL · 13,7 MB
- Gyroid Cone Bottom Right no Mic - Shell.stl STL · 8,5 MB
- Gyroid Cone Bottom Right with Mic - Shell.stl STL · 9,6 MB
- Gyroid Cone Bottom Right with Mic- Infill.stl STL · 13,5 MB
- Categoría
- Tecnología
- Formatos
- STL
- Descargas
- 284
- Publicado
Sobre este modelo
This custom set of cones is compatible with the open-sourced Head(amame) Headphones V2.
See here for video: https://youtu.be/hUSOuSBmkHQ
This open-back design allows air to pass through the ear cups from the rear of the speaker driver reducing resonances and low-frequency build-up that would be caused by a rear enclosure. Open-back designs are your best open for clear and natural sound.
Files are provided for single and dual extruder printers:
Single Extruder: https://than.gs/m/930949 Dual Extruder: https://than.gs/m/930954
Print two each of the “Cone Top” and “Headband Attachment” files and one of the “Cone Bottom Left” files. Depending on whether you have a mic, print either the “Cone Bottom Right no Mic” or “Cone Bottom Right with Mic” file.
For the Dual Extruder file set, you will need to combine the appropriate “-Infill” and “-Shell” files in your slicer.
To complete your set of headphones you will need to: • Download and print the remaining pieces from https://than.gs/m/908651 • Purchase electronics from https://headamame.com/
Assembly instructions can be found here: https://youtu.be/2iNJaU211fA
Descripción original del autor, publicada en Thangs.
