Gridfinity Tunnel Risers
Riser blocks for gridfinity designed to allow routing cables underneath and around other gridfinity modules.
Thangs entrega los archivos a usuarios con cuenta gratuita
Licencia
Uso comercial permitidoPuedes usarlo, modificarlo y venderlo manteniendo el aviso de copyright del autor.
Al descargar aceptas respetar la licencia y dar crédito a Joshua C.
Archivos (35)
- tunnel_riser_1x1x4.stl STL · 516 KB
- tunnel_riser_2x1x4.stl STL · 991 KB
- tunnel_riser_2x2x4.stl STL · 1,9 MB
- tunnel_riser_3x1x4.stl STL · 1,4 MB
- tunnel_riser_3x2x4.stl STL · 2,7 MB
- tunnel_riser_3x3x4.stl STL · 4,0 MB
- tunnel_riser_4x1x4.stl STL · 1,9 MB
- tunnel_riser_4x2x4.stl STL · 3,6 MB
- tunnel_riser_4x3x4.stl STL · 5,4 MB
- tunnel_riser_4x4x4.stl STL · 7,1 MB
- tunnel_riser_5x1x4.stl STL · 2,4 MB
- tunnel_riser_5x2x4.stl STL · 4,5 MB
- tunnel_riser_5x3x4.stl STL · 6,7 MB
- tunnel_riser_5x4x4.stl STL · 8,8 MB
- tunnel_riser_5x5x4.stl STL · 11,0 MB
- tunnel_riser_6x1x4.stl STL · 2,8 MB
- tunnel_riser_6x2x4.stl STL · 5,4 MB
- tunnel_riser_6x3x4.stl STL · 8,0 MB
- tunnel_riser_6x4x4.stl STL · 10,6 MB
- tunnel_riser_6x5x4.stl STL · 13,1 MB
- tunnel_tower_1x1x8.stl STL · 642 KB
- tunnel_tower_1x1x12.stl STL · 768 KB
- tunnel_tower_1x1x16.stl STL · 898 KB
- tunnel_tower_1x1x18.stl STL · 898 KB
- tunnel_tower_1x1x20.stl STL · 1,0 MB
- tunnel_tower_2x1x8.stl STL · 1,2 MB
- tunnel_tower_2x1x12.stl STL · 1,4 MB
- tunnel_tower_2x1x16.stl STL · 1,6 MB
- tunnel_tower_2x1x18.stl STL · 1,6 MB
- tunnel_tower_2x1x20.stl STL · 1,8 MB
- tunnel_tower_2x2x8.stl STL · 2,2 MB
- tunnel_tower_2x2x12.stl STL · 2,6 MB
- tunnel_tower_2x2x16.stl STL · 2,9 MB
- tunnel_tower_2x2x18.stl STL · 2,9 MB
- tunnel_tower_2x2x20.stl STL · 3,3 MB
- Categoría
- Herramientas
- Formatos
- STL
- Descargas
- 327
- Publicado
Sobre este modelo
Riser blocks for gridfinity designed to allow routing cables underneath and around other gridfinity modules.
The 21mm tunnels are large enough to push USB A connectors and barrel jacks thru. However AC wall plugs will not fit (e.g. most NEMA connectors) nor will larger IEC connectors (like the ever immortal C13 connector popularized by PC power supplies).
Originally motivated when gridfinitizing a battery charging cabinet.
Provided many likely model sizes for convenience, but if you need other dimensions, the OpenSCAD model is available here: https://github.com/jcorbin/gridfinity-risers
Made based on modules from https://github.com/vector76/gridfinity_openscad .
I've also made a standalone baseplate (https://than.gs/m/859253) variation of this block if you don't want to print out a base frame.
Descripción original del autor, publicada en Thangs.
