Gridfinity Stackable Cups with Honeycomb Walls
NOTE: nothing to do with HSW (Honeycomb Storage Wall) ; these are just Gridfinity cups with honeycomb walls with metrics designed to minimize material.
Thangs entrega los archivos a usuarios con cuenta gratuita
Licencia
Uso comercial permitidoPuedes usarlo, modificarlo y venderlo manteniendo el aviso de copyright del autor.
Al descargar aceptas respetar la licencia y dar crédito a Joshua C.
Archivos (30)
- hex_cup_1x1x4.stl STL · 836 KB
- hex_cup_1x1x4_nolip.stl STL · 836 KB
- hex_cup_1x1x6.stl STL · 1,0 MB
- hex_cup_1x1x6_nolip.stl STL · 1,0 MB
- hex_cup_1x1x12.stl STL · 1,7 MB
- hex_cup_1x1x12_nolip.stl STL · 1,7 MB
- hex_cup_1x2x4.stl STL · 1,2 MB
- hex_cup_1x2x6.stl STL · 1,6 MB
- hex_cup_1x2x12.stl STL · 2,6 MB
- hex_cup_1x3x4.stl STL · 1,6 MB
- hex_cup_1x3x6.stl STL · 2,0 MB
- hex_cup_1x3x12.stl STL · 3,4 MB
- hex_cup_2x1x4.stl STL · 1,2 MB
- hex_cup_2x1x6.stl STL · 1,6 MB
- hex_cup_2x1x12.stl STL · 2,6 MB
- hex_cup_2x2x4.stl STL · 1,7 MB
- hex_cup_2x2x6.stl STL · 2,2 MB
- hex_cup_2x2x12.stl STL · 3,7 MB
- hex_cup_2x3x4.stl STL · 2,3 MB
- hex_cup_2x3x6.stl STL · 2,9 MB
- hex_cup_2x3x12.stl STL · 4,7 MB
- hex_cup_3x1x4.stl STL · 1,6 MB
- hex_cup_3x1x6.stl STL · 2,0 MB
- hex_cup_3x1x12.stl STL · 3,5 MB
- hex_cup_3x2x4.stl STL · 2,3 MB
- hex_cup_3x2x6.stl STL · 2,9 MB
- hex_cup_3x2x12.stl STL · 4,7 MB
- hex_cup_3x3x4.stl STL · 2,9 MB
- hex_cup_3x3x6.stl STL · 3,7 MB
- hex_cup_3x3x12.stl STL · 5,8 MB
- Categoría
- Herramientas
- Formatos
- STL
- Descargas
- 987
- Publicado
Sobre este modelo
NOTE: nothing to do with HSW (Honeycomb Storage Wall) ; these are just Gridfinity cups with honeycomb walls with metrics designed to minimize material.
Inspired by a question in the Gridfinity discord, this is a recreation of a gridfinity cup with most of the wall material cut out by a hexagon grid. This model was created similarly to the tunnerl riser above, using [vector76] gridfinity mmodules and [bosl2] to manage the hexagaon window cutouts.
A potential use here would be a stackable bin, whose contents would still be visble thru the side when stacked (see the primay 2x2x6 model).
Another use would be for a non-stacking pen cup (see the 1x1x12 nolip model).
The underlying OpenSCAD parametric model is part of my gridfinity riser (https://github.com/jcorbin/gridfinity-risers) repository for further customization. A similar cup can be seen in a picture uploaded by [ashleyi100 on thangs][ashleyi100] which looks similar to this [non gridfinity box][hcomb_box] on printables.
[ashleyi100]: https://thangs.com/designer/ashleyi100 [bosl2]: https://github.com/revarbat/BOSL2 [hcomb_box]: https://www.printables.com/model/250845-honeycomb-pattern-box-with-label [vector76]: https://github.com/vector76/gridfinity_openscad
Descripción original del autor, publicada en Thangs.
