Gridfinity Apple Barrel Paint
por MakerX en MyMiniFactory
The "No More Rolling Around" Gridfinity Paint Rack 🎯
MyMiniFactory entrega los archivos a usuarios con cuenta gratuita
Licencia
Solo uso personalCC BY-NC-ND 4.0 — Atribución, no comercial, sin derivadas
Solo para uso personal, sin modificarlo y dando crédito. No se permite vender ni redistribuir cambios.
Al descargar aceptas respetar la licencia y dar crédito a MakerX.
Archivos (13)
- Makerx Gridfinity 1 Apple Barrel Paint.stl STL
- Makerx Gridfinity 2 Apple Barrel Paint.stl STL
- Makerx Gridfinity 3 Apple Barrel Paint.stl STL
- Makerx Gridfinity 4 Apple Barrel Paint.stl STL
- Makerx Gridfinity 5 Apple Barrel Paint.stl STL
- Makerx Gridfinity 6 Apple Barrel Paint.stl STL
- Makerx Gridfinity Apple Barrel 1Paint.3Mf 3MF
- Makerx Gridfinity Apple Barrel 2Paint.3Mf 3MF
- Makerx Gridfinity Apple Barrel 3Paint.3Mf 3MF
- Makerx Gridfinity Apple Barrel 4Paint.3Mf 3MF
- Makerx Gridfinity Apple Barrel 5Paint.3Mf 3MF
- Makerx Gridfinity Apple Barrel 6Paint.3Mf 3MF
- Makerx Gridfinity Apple Barrel Paint.3Mf 3MF
- Categoría
- Miniaturas
- Formatos
- STL, 3MF
- Descargas
- 15
- Publicado
Sobre este modelo
The "No More Rolling Around" Gridfinity Paint Rack 🎯
You know the sound. You open the drawer, and half your Apple Barrel paints immediately make a break for it — rolling into each other, labels down, colors a mystery until you dig them all out. I got tired of it too. So I designed this.
🟩 𝗪𝗛𝗔𝗧 𝗠𝗔𝗞𝗘𝗦 𝗜𝗧 𝗪𝗢𝗥𝗞
▸ 𝗚𝗿𝗶𝗱𝗳𝗶𝗻𝗶𝘁𝘆 𝗡𝗮𝘁𝗶𝘃𝗲 — Drops straight into any standard Gridfinity base grid. Each holder is 2 squares deep, and each paint occupies 1 square wide — so a 6-paint holder fits a 2x6 footprint. Scale your collection, scale your grid.
▸ 𝗙𝗶𝘁𝘀 𝗔𝗽𝗽𝗹𝗲 𝗕𝗮𝗿𝗿𝗲𝗹 𝗮𝗻𝗱 𝗦𝗶𝗺𝗶𝗹𝗮𝗿 — Designed around Apple Barrel 2oz bottles, but any paint of similar diameter and height will slot right in. If you're not sure, drop a comment with your brand and I'll let you know.
▸ 𝗣𝗶𝗰𝗸 𝗬𝗼𝘂𝗿 𝗦𝗶𝘇𝗲 — Available in six sizes, from a single slot up to six. Mix and match to fill your drawer exactly the way you want it.
▸ 𝗡𝗼 𝗔𝘀𝘀𝗲𝗺𝗯𝗹𝘆 𝗥𝗲𝗾𝘂𝗶𝗿𝗲𝗱 — Print it, drop it in, load it up. Done.
🟩 𝗣𝗥𝗜𝗡𝗧 𝗦𝗘𝗧𝗧𝗜𝗡𝗚𝗦
Brim recommended (0.5mm gap for easy removal) · 0.10mm layer height · 10% gyroid infill · 2 walls · PLA
Printed mine on the Creality Hi — ran the 1x6 two-per-bed and filled a 24-paint drawer with room to spare. Your mileage may vary, but the results speak for themselves. Happy organizing! 🎯
Descripción original del autor, publicada en MyMiniFactory.
