GRIDFINITY 5 INCH SANDING DISC-DRYER

Gridfinity 3x3x10 holder for 125 mm sanding discs with 3 perforated silica gel corners to keep discs dry. Smaller than the usual 4x4. Description: A Gridfinity bin for 125 mm (5") sanding discs that fits in a 3x3 footprint instead of the usual 4x4, and protects the discs from humidity. Three corners host perforated silica gel containers (with matching perforations in the bin walls) so air circulates and the silica gel keeps moisture away. The fourth corner carries the embossed grit label. Features: Gridfinity 3x3x10, standard baseplates Fits 125 mm / 5" discs (tested with Mirka Abranet) 3 silica gel containers with snap-fit lids Perforations on containers and bin walls Open sides for easy access Embossed grit label in the fourth corner Print settings: Layer height: 0.2 mm Infill: 15% Supports: No Material: PLA / PETG Any color (two-color in the photos is just aesthetic) Silica gel not included Here a version without dryer bins https://www.thingiverse.com/thing:7432988 Tip: fine perforations need a well-tuned printer. If something doesn’t fit, let me know in the comments. Printed and tested on the Creality K2. If you like it, leave a like and share a photo of your print with a Make!