Gridfinity 4x4 and 4x2 base French cleat mount
por shoooo en Printables
Grdifinity 4x2 base holder for 3/4" French cleat walls. Prints in 2 parts.
Licencia
Uso comercial permitidoPuedes imprimirlo, modificarlo y venderlo dando crédito al autor.
Al descargar aceptas respetar la licencia y dar crédito a shoooo.
Archivos (4)
- Categoría
- Organización
- Formatos
- STL
- Descargas
- 631
- Publicado
Sobre este modelo
Two options for attaching back (cleat) - CA glue. Designed with a mating registration surfaces to locate horizontally in the center and to give lots of strength for almost all purposes with just CA glue - Hardware, made for ¼ bolts- 2 x ¾" long ¼ 20 bolt - 2 x ¼ 20 nuts
Design details: - Skeletonized to minimize material requirements. - Holes on the bottom serve to prevent dust accumulation - Made for 3/4" plywood (note: 3/4" plywood is usually closer to 0.7" thick, or around 18mm). - Designed around standard imperial specs common in most US shops (sorry world) - Could easily be remixed for just about any mounting system
Print details - Use snug supports just for the vertical holes, no other support needed (might even be able to get away with eliminating those) - Adaptive layer height saves a bunch of time - Printed great on a P1P, using Bambulabs Matte PLA
Descripción original del autor, publicada en Printables.
