Gopro Tripod
por winter0is0coming en Printables
This is a (almost) print in place gopro tripod. You will need glue and a M5 nut and ofcourse a (gopro) thumb screw.
Licencia
Solo uso personalCC BY-NC-SA 4.0 — Atribución, no comercial, compartir igual
Uso personal dando crédito; sin fines comerciales y las modificaciones con la misma licencia.
Al descargar aceptas respetar la licencia y dar crédito a winter0is0coming.
Archivos (3)
- Categoría
- Tecnología
- Formatos
- STL, STEP
- Descargas
- 3,059
- Publicado
Sobre este modelo
Print both parts. I used PETG. You must not use support for “gopro tripod part 1” For the second part you can use support but only on the underside (I used “support on buildplate only” and increased “XY separation between an object and its support” to 4 mm). After printing you can move the tripod stands (you might need alittle bit of force). Glue the two parts together. Put the nut in the groove and now you can mount your gopro on it.
If you enjoy the print and want to buy me a coffee…Here's the link: https://buymeacoffee.com/winter0is0coming
Disclaimer: gopro is in stl-files not included :-)
Descripción original del autor, publicada en Printables.
