Glowing Skull Candle for LED Tealights – Melted
Switch on a 38 mm LED tealight, drop it in from the top and an angry skull wakes up on your shelf: the eye sockets and the nose glow orange, and a little light leaks between the long teeth of its grin. It looks like one of those store-bought melting wax skull candles, but you print it yourself in on
Thangs entrega los archivos a usuarios con cuenta gratuita
Licencia
Solo uso personalSin licencia indicada
El autor no indicó una licencia: todos los derechos le pertenecen. Úsalo solo para imprimir en casa y consulta al autor para cualquier otro uso.
Al descargar aceptas respetar la licencia y dar crédito a Mariano P.
Archivos (1)
- vela_calavera.stl STL · 25,8 MB
- Categoría
- Jardín
- Formatos
- STL
- Descargas
- 1
- Publicado
Sobre este modelo
Switch on a 38 mm LED tealight, drop it in from the top and an angry skull wakes up on your shelf: the eye sockets and the nose glow orange, and a little light leaks between the long teeth of its grin. It looks like one of those store-bought melting wax skull candles, but you print it yourself in one piece, standing up, with no supports.
WHY YOU'LL LIKE IT - The glow is designed, not lucky: behind the eyes the wall is exactly 0.9 mm and behind the nose 1.2 mm, so the light shines through white or ivory PLA while the rest of the 4 mm wall stays solid. - The face covers the whole front: heavy angry brow, slanted eyes, cheekbones and an ear-to-ear grin with two rows of long teeth. - A thick, soft wax rim with gentle waves on top, like a candle that has been burning for hours. - Prints standing, in one go: no supports, no glue, no filament changes. - Fits common LED tealights: the 48 mm opening takes 38 mm battery candles with room for your fingers.
WHAT'S INCLUDED - 1 STL file: skull candle, dia. 62 × 87 mm. - Original design.
#cultsoween
PRINT SETTINGS (suggested) - Supports: none · Layer: 0.16–0.2 mm · Walls: 3 · Infill: 10–15 % · Nozzle: 0.4 mm - Material: white, ivory or "natural" PLA for the glow (dark colors will not let the light through) - Orientation: standing on its flat base, as the file comes - Fits a 120 × 120 mm bed Settings are suggestions. The model was checked in CAD for printability: no supports, closed watertight mesh.
ASSEMBLY & CARE 1. Print standing on the flat base. Nothing to assemble. 2. Drop a 38 mm LED tealight into the opening at the top. To switch it on or off, tip the candle holder over gently. 3. For a stronger glow use a warm orange or flickering LED tealight. 4. Optional: brush a wash of dark acrylic paint over the face and wipe it off to make the brow and teeth pop. 5. SAFETY: LED tealights only. NEVER use a real flame (PLA softens and burns).
LICENSE Personal use only: print it as many times as you like for yourself, friends and family. Please don't share or resell the files. Want to sell prints? A commercial license is available — just send me a message.
Post a Make when you print it — I'd love to see it glowing!
Descripción original del autor, publicada en Thangs.
