Glitch Planter
por vexanix en Printables
It's a planter/vase. You can put plants in it, use it as a pencil cup, or make the worlds worst beer cozy (106%).
Licencia
Solo uso personalCC BY-NC-SA 4.0 — Atribución, no comercial, compartir igual
Uso personal dando crédito; sin fines comerciales y las modificaciones con la misma licencia.
Al descargar aceptas respetar la licencia y dar crédito a vexanix.
Archivos (8)
- Glitch Planter - Vase Mode Only.stl STL · 169 KB
- Base Plate.stl STL · 22 KB
- Glitch Planter - Flat Top - Drain.stl STL · 670 KB
- Glitch Planter - Flat Top - Solid.stl STL · 458 KB
- Glitch Planter - Pointy Top - Drain.stl STL · 658 KB
- Glitch Planter - Pointy Top - Solid.stl STL · 447 KB
- Glitch Planter - Double Height.stl STL · 1,0 MB
- Glitch Planter - Double Height Solid.stl STL · 871 KB
- Categoría
- Hogar
- Formatos
- STL
- Descargas
- 26,497
- Publicado
Sobre este modelo
If you want a vase with a drain, the Flat Top versions will work in vase mode in PrusaSlicer.
Pointy Tops will not work with Vase Mode. We got the pointy tops and flat tops, with drains or solid bottoms. There is also a base plate to catch draining water. No supports needed. Inner diameter is 63mm at current scale.
I printed mine at 0.20 layer height with a 0.60 nozzle. I highly recommend tricolor silk pla, it really pops on these.
The multicolor ones we're both printed with YOUSU PLA Tri-Color Red/Gold/Blue.
Vase Mode Scaling
For some reason when scaling this model in vase mode at certain percentage ranges the slicers go derp with random corners creating horizontal line breaks in the print. In Prusaslicer this can easily be resolved by scaling the model first, and then selecting the ‘Fix through the netfab’ option. Scale > Repair through the netfab
Edit: Added a taller version for a request. It looked okay when I sliced it, but no guarantees, especially for vase mode.
Descripción original del autor, publicada en Printables.
