Gingerbread Market Stall Kit Card

Gingerbread Market Stall Kit Card A light-up Christmas market stall made of gingerbread that prints as one kit card, just like a plastic model kit: snip the 11 numbered parts off the sprue, plug them together without glue and put an LED tealight inside. The whole counter glows, with a gingerbread seller waving at you from behind it. Two colours, no AMS needed. Every part is a caramel plate with the white icing on top, so the whole card needs one single filament change at 2.0 mm. The no-AMS profiles pause there for you. Christmas Collection The Gingerbread Village: 3 kit cards, same technique

More Christmas prints

All Christmas models: robventions Christmas collection Highlights

- One print, one kit card: 171 × 173 mm, fits every Bambu Lab printer including the A1 mini.

- No AMS needed: one pause at 2.0 mm to swap to white. With AMS it is one single filament change.

- No glue: the front and back wall lock into the gables with tenons, the roof sits on tabs, the stall plugs into the base with pegs. The counter board slides into two slots, the sign plugs into the ridge.

- Open counter: the gingerbread seller with his bow tie stands in the counter opening, a garland of gingerbread hearts hangs above him, hearts and stars lie on the counter.

- 5 sign texts: Glühwein, Lebkuchen, Mulled Wine, Gingerbread or a blank sign for your own text. Each one is its own plate in every profile.

- It lights up: lift the stall off the base and put an LED tealight (up to 38 mm) inside. The open front, the heart windows and the side window glow.

- A small surprise: “Let it Snow” is written on the base under the stall.

- No supports, all parts already oriented.

5 sign texts, 5 plates Every print profile has 5 plates. Each plate holds the whole kit card, they only differ in the sign on the ridge. Print the one you like:

- Plate 1: Glühwein (German mulled wine)

- Plate 2: Lebkuchen (German gingerbread)

- Plate 3: Mulled Wine

- Plate 4: Gingerbread

- Plate 5: blank sign for your own text

Your own text (plate 5) In Bambu Studio, zoom to the sign (part 9) and add a text part on its caramel field, for example with right-click on the card → Add part → Text. Set the depth to 0.6 mm, so it is exactly as tall as the icing. The field is about 38 × 9 mm: use a bold font, 6 to 8 mm high. With AMS, give the text filament 2 (white). Without AMS there is nothing else to do: everything above the pause prints white anyway. Size

- Assembled with base: about 59 × 67 mm, 70 mm tall to the top of the sign

- Stall 54 × 52 mm, inside 50 × 42 mm (room for an LED tealight up to 38 mm)

- Kit card: 171 × 173 mm

Print profiles

- P1S with AMS: about 1.7 h, 42 g + 7 g white

- P1S / X1 / P1P / A1, no AMS: pause at 2.0 mm, about 1.7 h, 47 g

- A1 mini with AMS lite: about 1.8 h, 42 g + 7 g white

- A1 mini, no AMS: pause at 2.0 mm, about 1.8 h, 48 g

- 0.2 mm layers, first layer 0.2 mm too (the colour change depends on it), textured PEI plate, no supports

- Colours as shown: Bambu PLA Matte Caramel + Ivory White.

No AMS? Load the caramel filament and start the print. At 2.0 mm the printer pauses: unload, load white, resume. That's it. With AMS There is only one filament change, so the prime tower is flat (2 mm tall) and already placed in the empty field of the card. What you need

- Flush cutter