Geared Phone stand 2
por Thorin Oakenshield en Printables
Geared Phone stand -2 version Size L and XL Print-in-place
Licencia
Solo uso personalCC BY-NC-ND 4.0 — Atribución, no comercial, sin derivadas
Solo para uso personal, sin modificarlo y dando crédito. No se permite vender ni redistribuir cambios.
Al descargar aceptas respetar la licencia y dar crédito a Thorin Oakenshield.
- Categoría
- Tecnología
- Formatos
- STL
- Descargas
- 10,605
- Publicado
Sobre este modelo
Geared Phone stand 2 - I wanted to completely redesign the original version, but I found that the original was well made, so I only changed a few things -
- a new gear pattern,
- a new more finely graduated locking mechanism,
- charging holes for a wider cable,
- larger width - it is a little more robust,
- I prepared two size versions - L and XL.
- The L version is for landscape phones with a width of 70-75mm
- The XL version is for landscape phones with a width of 76-80mm or even for small tablets.
- This version is a complete print-in-place, the tolerances between the parts /0.35-0.4mm/ should be suitable for most printers.
- I printed with a layer height of 0.2mm and a nozzle of 0.4mm.
- The filament is Prusament PLA Prusa Pro Green - a very nice color
Do not use a brim when printing! The parts will then stick together and will not move! Before printing, I recommend gently roughening the printing plate with a scotch-brite sponge + isopropyl
Descripción original del autor, publicada en Printables.
