Gallina - Decorative Hen Sculpture

A stylized hen sculpture by Santurtzi3D, supplied as one piece at approximately 100 mm tall. AI-assisted creation, generated primarily from text according to the creator. The exact generation tool for this historical model is not documented. Images are digital renders of the supplied mesh, not photographs. Digitally validated; not physically printed. The original file is preserved. Three microscopic disconnected fragments were removed from the working copy and the model was tilted 5.58 degrees to improve its geometric support. No artistic redesign. Dimensions: 53.07 x 82.38 x 99.97 mm (X/Y/Z). STL and geometry-only 3MF in millimetres. The 3MF is not a tested printer profile. Reference slicing: OrcaSlicer 2.3.2, Bambu A1, 0.4 mm nozzle, PLA, 0.20 mm layers, 3 walls, 15% gyroid, automatic supports and 6 mm outer brim. Estimated total 4 h 06 min / 54.31 g including supports; settings and hardware will change this. Keep the supplied orientation and inspect your own preview. Supports are required under overhangs. Remove them carefully around toes, legs, beak and tail. Small tips can be fragile; avoid scaling down without checking printable detail. Digital balance is not a physical stability test. Decorative model, not a tested toy. Free download for personal use under the selected Standard Digital File License. The original Cults listing remains open price.