Fully assembled 3D printable wrench
por Daniel Norée en MyMiniFactory
After watching the infamous video from a few years back where Z-Corp prints a fully working wrench i decided i wanted to do the same thing on my own printer.
MyMiniFactory entrega los archivos a usuarios con cuenta gratuita
Licencia
Solo uso personalMyMiniFactory - Credit - Remix - Noncommercial
Licencia de MyMiniFactory: puedes imprimirlo y remezclarlo dando crédito, sin fines comerciales.
Al descargar aceptas respetar la licencia y dar crédito a Daniel Norée.
Archivos (2)
- Printable Wrench A 15.Stl STL
- Printable Wrench W More Gap A 0.Stl STL
- Categoría
- Herramientas
- Formatos
- STL
- Descargas
- 4,166
- Publicado
Sobre este modelo
After watching the infamous video from a few years back where Z-Corp prints a fully working wrench i decided i wanted to do the same thing on my own printer.
Now, i am not talking about a "print-several-pieces-and-then-assemble" version which there are already a ton of on the internet.
What i wanted to do was something i could print and that would actually be fully working straight out of the printer.
I like to think i came pretty close. All you need to do is to remove the internal support and your done!
Keep in mind this is a proof of concept, i just wanted to see if i could do it.
Updated 2013-10-16: Added "Printable Wrench W Longer Screw" which has a longer "screw" (3mm).
Updated 2013-08-30: I have added two new files. One with a slightly bigger gap between moving parts. This one has 0,55mm gap instead of 0,35mm. Let me know if it works out (in particular with PLA). I have also added a STEP file with no support for anyone who maight want it.
Here is a short video: http://youtu.be/oMmsJVUAK3Q
Experimantal "heavy duty" version: https://www.youmagine.com/designs/printable-wrench-reworked
Descripción original del autor, publicada en MyMiniFactory.
