FREE Witch Hat Add-On – Halloween Ghost Duo | 3D Printable STL | No AMS | Commercial License

🧙‍♀️ FREE Witch Hat Add-On – Halloween Ghost Duo | 3D Printable STL Give your Halloween Ghost a spooky new look with this FREE Witch Hat Add-On! 🎃 This redesigned version is much easier to print than the original hat, with significantly fewer supports needed for a quicker, simpler print. Designed to fit the Cute Ghost Duo, it’s an easy way to add even more Halloween charm to your ghost display!

✨ FREE Add-On – Hat Only ✨ NO AMS NEEDED ✨ Minimal supports for a quick, easy print ✨ Print in your favorite Halloween colors! ⚠️ The Halloween Ghost Duo (https://than.gs/m/1610922) base set is required. This listing includes the witch hat only — ghosts are sold separately. [https://than.gs/m/1610922]( https://than.gs/m/1610922)

This FREE Witch Hat Add-On includes: - An easy to print Witch Hat

Features: - NO AMS NEEDED: This model is designed to print by piece and color! You don’t need an AMS to print this model which also means it prints faster and with much less wasted filament. - Modular Assembly: All base pieces are engineered to fit together*, making assembly simple and satisfying. - Commercial License Included: Sell your finished prints with confidence — license included with purchase, no subscription required!

SAFETY NOTE: This model contains small parts that may present a choking hazard. It is not suitable for young children or pets. For decoration purposes only. --- Assembly Notes Assembled Size at 100%: Height: 2.75 inches (Approximate) Width: 3.35 inches (Approximate) Depth: 3.35 inches (Approximate)

Some of the pieces will have tight fits to hold parts together without glue. If you have issues with fit, please feel free to reach out to me and I will be happy to assist you. If your machine does not have very precise or accurate tolerances, you may want to scale the models up or adjust your precision settings. Scaling down model will not work as the tolerances will likely be too small for the pieces to fit.

Print tolerances vary by printer. The settings used in this print were in Bambu Studio, and printed on a Bambu X1C using a 0.4 nozzle printed at 0.20mm layer height Standard print quality settings. Filament used was PLA and PLA+. Plate used was Bambu Textured PEI Plate.

Adding variable height, ironing or smaller layer heights will decrease the visibility of any lines even more than what is shown in the photos.