FPV Drone Porta-Launcher
por Gerardo Valdez en MyMiniFactory
This is a portable and foldable launchpad for fpv drones. I used to fly off wet grass and had loads of issues with wet blades of grass getting on my camera lens, dirt in my motors, dust, etc. So this was made to make sure everytime my bird took to the skies, it was happy and clean to rip some sky up
Licencia
Solo uso personalMyMiniFactory - Credit - Remix - Noncommercial
Licencia de MyMiniFactory: puedes imprimirlo y remezclarlo dando crédito, sin fines comerciales.
Al descargar aceptas respetar la licencia y dar crédito a Gerardo Valdez.
Archivos (11)
- Categoría
- Tecnología
- Formatos
- STL
- Descargas
- 421
- Publicado
Sobre este modelo
This is a portable and foldable launchpad for fpv drones. I used to fly off wet grass and had loads of issues with wet blades of grass getting on my camera lens, dirt in my motors, dust, etc. So this was made to make sure everytime my bird took to the skies, it was happy and clean to rip some sky up :) 99% of this is 3d printed, only parts needed to put together are some readily available m3 and m4 screws and matching nuts.
The ability to fold it up nice and tidy allows for it to be stowed away in a bag or backpack safely. It has varied angles for the arms from 15 degrees to about 60 degrees (perfect for any type of freestyle or race pilot)
Tough, sexy, and useful, what's not to love? :)
Printed at .2mm layer heights and 50% infill with 4 shells on all sides. Enjoy!
Descripción original del autor, publicada en MyMiniFactory.
