FPV DRONE
por RCMakerLab en Printables
Drone frame for Arduino RC
Licencia
Solo uso personalCC BY-NC-SA 4.0 — Atribución, no comercial, compartir igual
Uso personal dando crédito; sin fines comerciales y las modificaciones con la misma licencia.
Al descargar aceptas respetar la licencia y dar crédito a RCMakerLab.
Archivos (12)
- Drone V2 - Part 12 Top Plate_PLA-Infill-40.stl STL · 578 KB
- Drone V2 - Part 4 FPV CAM Holder_PLA-Infill-20.stl STL · 45 KB
- Drone V2 - Part 18 Battery Stand_PLA-Infill-40.stl STL · 322 KB
- Drone V2 - Part 3 Foot-PLA_Infill-100.stl STL · 1,0 MB
- Drone V2 - Part 16 FPV Camera Holder_PLA-Infill-20.stl STL · 174 KB
- Drone V2 - Part 17 GoPro Stand_PLA-Infill-60.stl STL · 1,2 MB
- Drone V2 - Part 1 Bottom Body_PLA_Infill-60.stl STL · 887 KB
- Drone V2 - Part 12 Spacer-PLA-Infill-100.stl STL · 7,4 MB
- Drone V2 - Arm 2 - ABS- INFILL-100.stl STL · 362 KB
- Drone V2 - Arm 1 - ABS- INFILL-100.stl STL · 329 KB
- Drone V2 - Arm 3 - ABS- INFILL-100.stl STL · 414 KB
- Drone V2 - Arm 4 - ABS- INFILL-100.stl STL · 326 KB
- Categoría
- Varios
- Formatos
- STL
- Descargas
- 2,012
- Publicado
Sobre este modelo
Many parts of the drone are designed for PLA filament. The motor arms are designed for heat resistant filament (PETG, ABS, ASA). Assembly steps and details are shown in the video. Slicer settings are included in the part names. All settings not mentioned are standard slicer settings. 0.2 layer is suitable. The names and links of the materials needed for the drone are in the detail section below the video. If you like my projects and want to support me to make them sustainable... Patreon
Descripción original del autor, publicada en Printables.
