Foldable Drone 400mm
por JayS en Printables
a 400mm foldable drone
Licencia
Solo uso personalCC BY-NC-SA 4.0 — Atribución, no comercial, compartir igual
Uso personal dando crédito; sin fines comerciales y las modificaciones con la misma licencia.
Al descargar aceptas respetar la licencia y dar crédito a JayS.
Archivos (92)
- Battery_Plate.stl STL · 162 KB
- Front_Arm_Left.stl STL · 436 KB
- Front_Arm_Right.stl STL · 401 KB
- Gimbal Arm Pitch Clamp.stl STL · 49 KB
- Gimbal Arm Pitch.stl STL · 85 KB
- Gimbal Arm Roll.stl STL · 191 KB
- Gimbal_Cover_IMU.stl STL · 308 KB
- Housing_Cover_Back.stl STL · 184 KB
- Housing_Cover_Front.stl STL · 250 KB
- Landing_Pad_Front_Left.stl STL · 337 KB
- Landing_Pad_Front_Right.stl STL · 358 KB
- Lower_Housing.stl STL · 1,1 MB
- LED_Cover_Remote_LED.stl STL · 9 KB
- Locking_Pawl_Cover_Back.stl STL · 91 KB
- Logo.stl STL · 9 KB
- LED_Cover_GPS.stl STL · 65 KB
- Rear_Arm_Left.stl STL · 423 KB
- Rear_Arm_Right.stl STL · 423 KB
- Rear_Landing_Pad.stl STL · 72 KB
- Suport_GPS.stl STL · 157 KB
- Upper_Housing.stl STL · 549 KB
- Battery_Plate.3mf 3MF · 101 KB
- Front_Arm_Left.3mf 3MF · 153 KB
- Front_Arm_Right.3mf 3MF · 141 KB
- Gimbal Arm Pitch Clamp.3mf 3MF · 36 KB
- Gimbal Arm Pitch.3mf 3MF · 51 KB
- Gimbal Arm Roll.3mf 3MF · 86 KB
- Gimbal_Cover_IMU.3mf 3MF · 182 KB
- Housing_Cover_Back.3mf 3MF · 89 KB
- Housing_Cover_Front.3mf 3MF · 98 KB
- Landing_Pad_Front_Left.3mf 3MF · 124 KB
- Landing_Pad_Front_Right.3mf 3MF · 131 KB
- LED_Cover_GPS.3mf 3MF · 66 KB
- LED_Cover_Remote_LED.3mf 3MF · 20 KB
- Locking_Pawl_Cover_Back.3mf 3MF · 38 KB
- Logo.3mf 3MF · 32 KB
- Lower_Housing.3mf 3MF · 316 KB
- Rear_Arm_Left.3mf 3MF · 146 KB
- Rear_Arm_Right.3mf 3MF · 149 KB
- Rear_Landing_Pad.3mf 3MF · 59 KB
- Suport_GPS.3mf 3MF · 88 KB
- Upper_Housing.3mf 3MF · 162 KB
- Battery_Plate_0.2mm_ABS_MK3S_55m.gcode GCODE · 1,3 MB
- Front_Arm_Left_0.2mm_ABS_MK3S_3h4m.gcode GCODE · 4,7 MB
- Front_Arm_Right_0.2mm_ABS_MK3S_3h1m.gcode GCODE · 4,6 MB
- Gimbal Arm Pitch Clamp_0.2mm_ABS_MK3S_59m.gcode GCODE · 1,1 MB
- Gimbal Arm Roll_0.2mm_ABS_MK3S_4h26m.gcode GCODE · 4,4 MB
- Gimbal Arm Pitch_0.2mm_ABS_MK3S_2h44m.gcode GCODE · 2,7 MB
- Gimbal_Cover_IMU_0.2mm_ABS_MK3S_15m.gcode GCODE · 405 KB
- Housing_Cover_Back_0.15mm_ABS_MK3S_3h59m.gcode GCODE · 1,9 MB
- Housing_Cover_Front_0.15mm_ABS_MK3S_2h4m.gcode GCODE · 2,6 MB
- Landing_Pad_Front_Left_0.2mm_ABS_MK3S_1h49m.gcode GCODE · 5,4 MB
- Landing_Pad_Front_Right_0.2mm_ABS_MK3S_1h49m.gcode GCODE · 5,4 MB
- LED_Cover_GPS_0.15mm_PETG_MK3S_4m.gcode GCODE · 218 KB
- LED_Cover_Remote_LED_0.2mm_PETG_MK3S_4m.gcode GCODE · 58 KB
- Locking_Pawl_Cover_Back_0.2mm_ABS_MK3S_29m.gcode GCODE · 1,0 MB
- Logo_0.1mm_ABS_MK3S_3m.gcode GCODE · 67 KB
- Lower_Housing_0.2mm_ABS_MK3S_12h41m.gcode GCODE · 15,9 MB
- Rear_Arm_Left_0.2mm_ABS_MK3S_2h38m.gcode GCODE · 3,1 MB
- Rear_Arm_Right_0.2mm_ABS_MK3S_2h39m.gcode GCODE · 3,2 MB
- Categoría
- Varios
- Formatos
- STL, 3MF, GCODE, PDF
- Descargas
- 2,208
- Publicado
Sobre este modelo
This is a DJI Mavic inspired drone powered by a Pixhawk 4 flight controller. I have attached a parts list for my used components. Therefore, if you want to use different components these might not fit into the 3D model. With this setup you can achieve a flight time of approx. 12-15 minutes. A PETG as well as ABS version is provided as pre sliced gcode files.
Enjoy the model and let me know if everything works or anything is unclear. The evolution of this drone can be found here
Descripción original del autor, publicada en Printables.
