Fluted Swivel Jewelry Tower - Rotating Jewelry Box with 3 Swing-Out Trays, Ring Rolls, Earring Grid & Ring Dish Lid

An elegant fluted jewelry tower where every tier swings out on a hidden pivot pin. Open the ring rolls, the earring grid or the bracelet tray on its own - the others stay closed. The gold lid doubles as a ring dish with a ring cone for the rings you take off at night. A lovely Christmas gift to print for her (or for yourself).

Generated with the DIATEH GEN parametric engine.

WHAT YOU GET

- Base: Ø115 mm plinth with bead band and a D-shaped pin socket

- Tray 1 (30 mm): centre cup + 3 sections for bracelets, watches and necklaces

- Tray 2 (22 mm): low earring grid (15.5 mm cells) for studs and pairs

- Tray 3 (22 mm): 7 ring rolls with 2.25 mm slots + open bay

- Lid: fluted dome, bead band, ring dish and ring cone

- D-profile pivot pin and a gold finial cap

- README with assembly and print notes

HOW IT WORKS

All trays and the lid turn on one pin near the back edge (360 degrees free). Each tray rests flat on the rim below; pin clearance 0.30 mm, cap gap 0.35 mm. A 2.6 mm lead-in chamfer under every tray lets a swung-out tier glide back over the one below. Everything was checked digitally (watertight meshes, overhangs, full swing of every tray without collisions). The model has not been test-printed yet.

SIZE

About 115 x 115 x 128 mm assembled, approx. 330 g PLA (3 walls, 15 % infill). Fits a 180 x 180 mm bed.

PRINTING

- No supports: all parts print as exported (trays, lid, base upright, pin lying on its flat side)

- 0.2 mm layers, 0.4 mm nozzle, 3 walls, 15 % infill, PLA or PETG

- Looks best with trays in cream / dusty rose and base, lid and finial in silk gold

- Optional felt in the tray bottoms

Files: 4 x 3MF (trays, lid) + ZIP with base, pin and cap STL + README.