Floating Drip Tray 170 mm // Plant Saucer
This minimal drip tray offers effective runoff for excess water draining from your flower pots and planters. The inner pedestal creates an illusion of the pot floating above the tray, while remaining subtle and unobtrusive. The angled walls contain water despite being only 12mm tall. The full diamet
Thangs entrega los archivos a usuarios con cuenta gratuita
Licencia
Revisa las condicionesMake Anything Thangs License
El autor usa su propia licencia. Revisa sus condiciones en la página original antes de compartir, modificar o vender.
Al descargar aceptas respetar la licencia y dar crédito a Devin B.
Archivos (1)
- Floating Drip Tray 170mm diameter 60mm stand.stl STL · 1,3 MB
- Categoría
- Jardín
- Formatos
- STL
- Descargas
- 248
- Publicado
Sobre este modelo
This minimal drip tray offers effective runoff for excess water draining from your flower pots and planters. The inner pedestal creates an illusion of the pot floating above the tray, while remaining subtle and unobtrusive. The angled walls contain water despite being only 12mm tall. The full diameter is 170 mm and the pedestal is 60 mm -- ideal for pots with a base from 70 mm to 140 mm in diameter. I also have a larger 250 mm version here (https://than.gs/m/1027171?affiliateCode=MAKE).
_Printing Guidelines_
Print with sufficient wall thickness to create a watertight part. I used 3 shells, and 10 top solid layers, 20% gyroid infill and 3 bottom layers. Depending on your printer, you may need to increase shells, top solid layers, and flow/extrusion multiplier.
---
Photographed models were printed on the Bambu Lab X1-Carbon 3D Printer (https://bit.ly/MA_X1C) using Fillamentum PLA Extrafill Signal Red (https://bit.ly/FM-xtra) (also at MatterHackers (https://bit.ly/xtrafill)).* *_These affiliate links give me a commission on sales at no additional cost to you. Thanks for supporting Make Anything!_
Descripción original del autor, publicada en Thangs.
