FlexWeave Fabric-Style World Flags (v2.0)

FlexWeave Fabric-Style 3D Printed Flags (v2) These are flexible, fabric-style 3D printed flags, designed to behave more like cloth than rigid plaques. They’re built on a newly redesigned hex “fabric” mesh, giving improved flexibility, cleaner slicing, and more consistent multi-colour prints compared to the original version. The hex pattern adds a subtle textile feel while remaining reliable to print on consumer machines. Variants Included Most flags are available in three variants: Variant 1: Desk Flag (Original)

- Designed to mount on a pole and slot into the included printable stand

- Ideal for desks, shelves, and grouped displays

Variant 2: Large Hanging Flag (Hooks)

- Larger format (fills the Bambu X1C build plate)

- Hooks integrated into the top corners for wall or rail hanging

Variant 3: Large Hanging Flag (Cord Channel)

- Same large format as variant 2

- A horizontal cylinder channel across the top for threading cord, string, or wire

All variants use the same updated fabric mesh and flag geometry. Design & Print Notes

- Designed for a 0.4 mm nozzle

- Optimised for AMS

- Some designs include raised details (~0.5 mm height difference) for elements like crosses or symbols, where it improves clarity

- Other designs remain fully flat where that better suits the flag

- Approx. 6-6.5 mm thick overall, depending on variant and flag

Accessories Stand

- A matching printable stand is included for desk variants

- Recommended: at least 75% infill for stability

Available Flags This collection is actively expanding. Current designs include:

Algeria, Argentina, Australia, Brazil, Canada, Chile, China, Colombia, Czech Republic, England, Europe, Georgia, Ghana, Japan, Jordan, Laos, Morocco, Myanmar, New Zealand, Pakistan, Palestine, Puerto Rico, Qatar, Scotland, Senegal, Singapore, South Korea, Switzerland (square base), Turkey, UK, US, Vietnam, Wales.

Plus, generics to modify:

- Nordic Cross flags (thin / thick / dual) - For countries such as Norway, Denmark, Sweden, etc

- Stipe layouts (Vertical x3, Horizontal x3, Horizontal x2) - For countries such as Ireland, Germany, Poland, etc

New Mini Flags: https://makerworld.com/en/models/2629482-flexweave-fabric-style-mini-hanging-flags More US Flags: https://makerworld.com/en/models/2459785-flexweave-fabric-style-us-flags-v2-0 International Organisations: https://makerworld.com/en/models/2464644-flexweave-international-organisation-flags Other Flags (Race/Checkered & Pirate): https://makerworld.com/en/models/2378963-flexweave-fabric-style-other-flag A1 Mini & Scaling You can scale it to fit on the A1 Mini, and it will print fine, however the flexibility will be reduced.

- Scale to 75% in Bambu Studio

- Print using the same settings

- After printing, bend, roll and flex the mesh tightly to loosen it up

The lowest scale is about 60% before the mesh itself won't slice for a 0.4mm nozzle. Requests & Feedback

- Bug reports very welcome

- Country requests also welcome