FlexStow Snap Fit Storage Container w/Flexible TPU Hinge

🛠 Customizable in Your Browser Adjust size, height, clearance, and more so it prints exactly how you need. Customize it on the Lunar Prototypes website. No slicer hacks or CAD required.

Build Your Version Now (https://lunarprototypes.com/catalog/organization-storage/flexstow/flexstow-snap-fit-box.html)

See below for more details.

---

Overview Customizable snap-fit storage box with embedded TPU hinges and an assemble-while-printing two-material design.

The FlexStow Snap-Fit Box is a customizable 3D printable storage container for hardware, electronics, cards, tools, and other small items.

Set the exterior length, width, and height to create anything from a compact parts box to a larger purpose-built container.

Flexible TPU hinge straps are embedded during printing, creating a durable mixed-material hinge without screws, pins, glue, or traditional post-print assembly.

The box also features a secure snap-fit closure, customizable dimensions, and separate files for straightforward multi-material printing on a standard single-extruder printer.

---

Customization Instructions Customize your FlexStow Snap Fit Box (https://lunarprototypes.com/catalog/organization-storage/flexstow/flexstow-snap-fit-box.html) directly on the Lunar Prototypes website.

1. Navigate: Go to the customization tab on the model page. 2. Customize: Enter your desired measurements and adjustments. 3. Submit: Click submit and wait for the design to complete. 4. Download: Once the job completes, download your custom STL and slice as usual.

Note: The customization system is currently in beta. Your feedback helps us improve. 👉 Join our Discord (https://discord.gg/RdCvuQZbSj) if you have issues or ideas.

---

Printing Tips Printing Technology: FDM Layer Height: 0.2 mm Perimeters: 4 Infill: 10% Infill Pattern: Gyroid Recommended Material: PLA, PETG for container, TPU for hinges Supports: No Support Type: None

---

Instructions: 1. Set the dimensions. Enter the desired exterior length, width, and height in the customizer.

2. Generate the files. Download the customized container and TPU hinge strap models.

3. Print the hinges first. Slice and print the hinge straps in TPU, then remove them from the build plate.

4. Slice the container. Use PLA, PETG, or another suitable rigid material for the box and lid.

5. Locate the hinge bridges. In the slicer preview, find the two layers where printing begins to bridge over the hinge openings.

6. Add two pauses. Insert a pause immediately before each of those bridge layers begins.

7. Insert the lid hinges. At the first pause, place one end of each TPU strap into the hinge openings in the lid.

8. Check the fit and resume. Make sure the TPU sits completely flush and does not bulge above the surrounding surface, then continue printing.

9. Free the lid at the second pause. Carefully peel only the lid from the build plate. Do not remove or shift the build plate, or the remaining print may lose alignment.

10. Connect the box and lid. Position the lid beside the container and insert the exposed ends of the TPU hinges into the remaining hinge openings.

11. Check the hinges again. Confirm that both straps are fully seated, flat, and not protruding into the path of the nozzle.

12. Resume and finish. Continue the print so the final bridge layers permanently capture the TPU hinges inside the box.

---

Connect with Lunar Prototypes Like what we’re doing? Support the project on Patreon (https://patreon.com/LunarPrototypes). Even free members get early previews and project updates.