Flakoholic - Rope Thrower
Youtube Tutorial: https://youtu.be/uy8IHeFj8rw
Thangs entrega los archivos a usuarios con cuenta gratuita
Licencia
Solo uso personalSin licencia indicada
El autor no indicó una licencia: todos los derechos le pertenecen. Úsalo solo para imprimir en casa y consulta al autor para cualquier otro uso.
Al descargar aceptas respetar la licencia y dar crédito a bob a.
Archivos (21)
- Door.stl STL · 10 KB
- Main Body.stl STL · 478 KB
- Pin.stl STL · 572 KB
- TPU Center Roller 15.5mm Glue.stl STL · 265 KB
- TPU Center Roller 17.stl STL · 281 KB
- TPU Center Roller 20mm Glue.stl STL · 313 KB
- TPU Center Roller 22mm.stl STL · 313 KB
- TPU Center Roller 28mm Glue.stl STL · 632 KB
- TPU Center Roller 30mm.stl STL · 689 KB
- Center Roller 15.5mm Glue.stl STL · 259 KB
- Center Roller 17.stl STL · 275 KB
- Center Roller 20mm Glue.stl STL · 312 KB
- Center Roller 22mm.stl STL · 312 KB
- Center Roller 28mm Glue.stl STL · 633 KB
- Center Roller 30mm.stl STL · 690 KB
- Side Roller 28mm Glue.stl STL · 358 KB
- Side roller 30mm.stl STL · 386 KB
- Arm.stl STL · 1,0 MB
- Arm and Rollers.f3d F3D
- Flaker Main body.f3d F3D
- Bill of Materials Flake.pdf PDF
- Categoría
- Herramientas
- Formatos
- STL, F3D, PDF
- Descargas
- 62
- Publicado
Sobre este modelo
Youtube Tutorial: https://youtu.be/uy8IHeFj8rw
_WHICH ARMS SHOULD I PRINT?_ Look at the title of the files. They are very important. -There are two arms: Central & Side.
-You can choose to print either in a soft material (TPU) or hard (PLA, PETG, PA6, etc).
The difference is that the "soft" files have a slightly smaller inner diameter to properly fit the motor shaft.
-Then all files are separated between "glue" and no glue. The "glue" ones have a slightly smaller outside diameter to receive a 1.5mm thick rubber piece. If you use a different rubber thickness, like shrink tubing, it will affect the minimum or maximum diameter rope the flaker will allow.
Happy printing!
_TPU PRINT SETTINGS_ Gyroid 15% infill with 2 walls
This is the big brother of these small rope throwers that were popular a couple of years back. It is useful for anyone who has to flake large volumes of thin rope. Ex. slackliners, climbers, linemen, sailors, etc. Able to flake rope at around 100m/30s.
Total cost: $50 CAD
The bill of materials is in the files. Fusion files also available.
Descripción original del autor, publicada en Thangs.
