First Layer Test
por mikeneron en Printables
Some test files to adjust your settings to get the perfect first layer. These will print 1 layer provided you are…
Licencia
Uso comercial permitidoPuedes imprimirlo, modificarlo y venderlo dando crédito al autor.
Al descargar aceptas respetar la licencia y dar crédito a mikeneron.
Archivos (6)
- Categoría
- Para tu impresora
- Formatos
- STL
- Descargas
- 13,587
- Publicado
Sobre este modelo
Some test files to adjust your settings to get the perfect first layer. These will print 1 layer provided you are using a 0.2 mm layer height in your slicer settings. Then inspect your print and tweak one setting at a time until you get a perfect first layer as that is the most important layer.
Once you get a good result with the simple shapes, try the extreme test. If you can get that to print without any gaps, then you have a perfect first layer.
Print Settings
Printer:
Creality CR-10
Rafts: No
Supports:
No
Resolution: 0.2
Infill:
None
How I Designed This
Fusion 360
Category: 3D Printing Tests
Descripción original del autor, publicada en Printables.
