Firefly Lantern Nest | 萤火虫灯窝

六足萤火虫造型的单件摆件，翅间有向上开放的浅灯窝。灯窝在Z=24 mm处的中心线净宽约16.153 mm、净长约24.159 mm，可用浅槽深约8 mm；圆壁会收窄，不保证灯具适配。仅可自行测量选配独立封装、低温、低压的微型LED，也可留空陈列。普通38 mm茶蜡灯放不下。禁止蜡烛、明火、高温灯具及裸电池，不含任何电气组件。 尺寸：71.83 × 72.89 × 35.95 mm (X × Y × Z) 平底朝下。检查头部、触角、翅下及足身连接处的支撑，尽量保持灯窝内干净；不承诺免支撑。 本页模型文件：Firefly_Lantern_Nest_mm.stl、Firefly_Lantern_Nest_DISPLAY_COLOR.3mf 封面为基于实际模型参考图生成的AI数字场景，辅助检查视图为实际几何渲染，均非实物照片；尚未实体试打。本页模型下载仅含所列STL和通用3MF。STL无颜色；通用3MF包含几何与显示色，不是切片工程，也不是打印机即用文件。独立Orca参考工程不在本页提供；本页也不附Blender源文件、生成脚本或G-code。打印前请按自己的机型、耗材与供料槽检查颜色和支撑，并重新切片。 原创设计及署名：TechABJ / 理工阿白菌。许可：CC BY-NC-SA 4.0，署名、非商业性使用、相同方式共享。请保留作者署名与作品名称。 A one-piece, six-footed firefly sculpture with an open-top light recess between its wings. At Z=24 mm, centerline clearances are about 16.153 mm wide and 24.159 mm long, with roughly 8 mm of useful shallow depth. Curved walls narrow, so module fit is not guaranteed. Use only a separately enclosed, cool, low-voltage micro LED that you measure and select, or display it empty. A standard 38 mm tea light will not fit. Never use candles, flames, hot lights or loose batteries. No electrical parts are included. Dimensions: 71.83 × 72.89 × 35.95 mm (X × Y × Z) Print with the flat underside down. Inspect support beneath the head, antennae, wings and leg/body junctions, keeping the recess clear where feasible. Support-free printing is not promised. Model files: Firefly_Lantern_Nest_mm.stl, Firefly_Lantern_Nest_DISPLAY_COLOR.3mf The cover is an AI-generated digital scene based on actual model reference renders. The inspection views are renders of the actual geometry. None are photographs of physical prints. No physical print test has been performed. Model downloads on this page contain only the listed STLs and generic 3MF. STL has no color; the generic 3MF carries geometry and display colors, not a slicer project or printer-ready file. A separate Orca reference project is not included on this page. Blender source files, generation scripts and G-code are not included here. Set up your actual printer, materials and feeder slots, inspect colors and supports, and re-slice before printing. Original design and attribution: TechABJ / 理工阿白菌. License: CC BY-NC-SA 4.0, Attribution–NonCommercial–ShareAlike. Retain the creator credit and model title. https://creativecommons.org/licenses/by-nc-sa/4.0/