FilamentRackBracket

_This design was made with you in mind :)_

These Filament Rack Brackets are perfect for tidying up your 3D printing space and building something practical with your printer! They are printed out of PETG HF with an 80% infill for strength. \ Become a member (https://thangs.com/designer/mcinventiveproductions) to get the STL files and configured .3mf Bambu Studio File by selecting “Download All > Original”

Note: If you are interested in a commercial license to sell prints of my designs, you must obtain the license by signing up for my _Entrepreneur_ membership tier!

Model Assembly Pretty simple for this one — print the models, use some ~1 or 1 1/2 in wood screws to mount the dowels to the brackets, and mount the brackets to the wall in line with the 16in studs! Then load up your filament :)

Watch the associated reel showing the assembly on my instagram page @mcinventiveproductions (https://www.instagram.com/mcinventiveproductions/)

Materials Bambu Lab PETG HF (Black) — https://us.store.bambulab.com/ (http://shrsl.com/2n5nn-2yn7-1cwx9) 1 1/8in x 48 in Wood Dowel - https://www.homedepot.com/ (https://www.homedepot.com/pep/1-1-8-in-x-48-in-Raw-Wood-Round-Dowel-HDDH11848/203360190?source=shoppingads&locale=en-US&pla&mtc=SHOPPING-CM-CML-GGL-D30-030_020_MOULDINGS-NA-NA-NA-PLALIA-5707976-NA-NA-NA-NBR-NA-NA-NEW-NA&cm_mmc=SHOPPING-CM-CML-GGL-D30-030_020_MOULDINGS-NA-NA-NA-PLALIA-5707976-NA-NA-NA-NBR-NA-NA-NEW-NA-21521786579-165978160792-330387136723&gad_source=1&gclid=CjwKCAiAtNK8BhBBEiwA8wVt9-Ub2833sQf0HDfdl0FFnCL5c6yKqBP6donkp5SbtDGFtcM-UR8VJhoC0xcQAvD_BwE&gclsrc=aw.ds)

Print settings Material — PETG HF Print orientation — prints as shown in slicer image! Nozzle size: 0.4 mm Layer Height: 0.28mm Infill: 80% Bed Size of my Printer: 256x256mm

\ P.S. The links above may be affiliate links which allow me to benefit financially from your purchase at no extra cost to you!