Fiesta ST shift knob

Multi material shift knob designed for Ford Fiesta ST 6-speed. Intended for printing in multiple colors,

Print Settings

Printer Brand:

Prusa

Printer:

i3 MK2 MMU

Rafts:

No

Supports:

Yes

Resolution:

0.10mm

Infill:

50%

Filament: Hatchbox PETG

Notes:

Multi material shift knob designed for Ford Fiesta ST 6-speed. Intended for printing in multiple colors, as shown in the example photo, with weight added and surface finished.

Making:

- Print it, then fill it with .177 BBs through the hole in the bottom

- Squirt some superglue in after the BBs, slosh it about and let it set, they'll stop rattling

- Add nut to thread onto shifter, bit more superglue to hold the nut in

- Once the glue is set, tap (through the nut) to thread the upper, plastic section of the hole

- Put in your car and feel clever

Optional finishing for PETG:

- Sand with 300 then 1000 as desired

- Finish top with XTC-3D

- Lightly wet sand bottom half and stem with 1000/2000 to provide matte surface on bottom

Extra parts needed:

- M12 x 1.25mm tap

- M12 x 1.25mm nuts (I used: Uxcell a16033100ux0272 M12x1.25 mm, search Amazon)