Fallout 4 Automatic laser rifle.
por Chris Wolfe en MyMiniFactory
Hey all.
MyMiniFactory entrega los archivos a usuarios con cuenta gratuita
Licencia
Solo uso personalMyMiniFactory - Credit - Remix - Noncommercial
Licencia de MyMiniFactory: puedes imprimirlo y remezclarlo dando crédito, sin fines comerciales.
Al descargar aceptas respetar la licencia y dar crédito a Chris Wolfe.
Archivos (42)
- Barrel Option 1A.stl STL
- Barrel Option 1B.stl STL
- Barrel Option 2A.stl STL
- Barrel Option 2B.stl STL
- Bront Barrel Bearing.stl STL
- Cable End Repaired 3 1.Stl STL
- Clip 1.Stl STL
- Clip 2.Stl STL
- Front Barrel Finished Untitled4.Stl STL
- Front Barrel Lens.stl STL
- Front Handle.stl STL
- Front Thing With Bearing 2.Stl STL
- Handle Cover Left Final.stl STL
- Handle Cover Right Final.stl STL
- Handle Join Cover Left.stl STL
- Handle Join Cover Right.stl STL
- Handle Spine Finished Untitled9.Stl STL
- Laser Rifle Front Barrel Repaired Final Repaired2.Stl STL
- Laser Rifle Rear Barrel Repaired Repaired.stl STL
- Low Poly Fusion Cell.stl STL
- Motor Mount2.Stl STL
- Part 1 Final.stl STL
- Part 2 Final Fixed.stl STL
- Part 2 Final.stl STL
- Rear Barrel Cap Finished.stl STL
- Rear Barrel Finished.stl STL
- Rear Connctor.stl STL
- Rear Thing 1.Stl STL
- Rear Thing 2.Stl STL
- Rear Thing With Bearing.stl STL
- Reflex Sight.stl STL
- Spine Left Untitled6.Stl STL
- Spine Right Untitled6.Stl STL
- Spine Untitled6.Stl STL
- Spinner Barrel Final Repaired.stl STL
- Spinner Barrel Final.stl STL
- Stock Cover Final.stl STL
- Stock Final Fixed.stl STL
- Stock Final.stl STL
- Trigger Final 57Fca817.Stl STL
- Wire Clip 1.Stl STL
- Wire Clip 2.Stl STL
- Categoría
- Cosplay y props
- Formatos
- STL
- Descargas
- 4,105
- Publicado
Sobre este modelo
Hey all. I recently did a fully funtional automatic laser rifle build based on an Arduino and sound board. Here are the .STL files along with a netfabb file showing the location of all tha parts/assembly. In short this isnt perfect but you should be able to build it with a removable stock. Please refer to the screenshots for screw and bolt alignment.
Print the SPINE and handle solid, acetone weld it together, then everything else with largest honeycomb infill. Best with 3 shell layers.
FYI part tolarances are not good :)
Slice and print the SPINE parts (offset for strength) then acetone weld it together. Print the HANDLE and Stock then acetone weld them together. Print the Rear barrel cap and rear connector, push the connector part of the way inside the barrel cap and acetone weld them together. Print x13 wire clip 2 and x2 wire clip 1.
*Edit 16/11/2016 Issue fixed with Stock cover final.stl. Download from here: https://www.dropbox.com/s/rt19nr79p8aruq3/stock%20cover%20final%20%28repaired%29.stl?dl=0
Descripción original del autor, publicada en MyMiniFactory.
