ESP32 Camera Mod for CORE One: 6x4 mm magnets and deeper case (XIAO ESP32-S3 + OV5640)

A remix of KeepTheBOX's ESP32 Camera Mod for CORE One, which follows the Buddy3D camera's three-magnet corner mount. All credit for the design goes there, and like the original this remix is CC BY-NC-SA 4.0. It's built for a Seeed XIAO ESP32-S3 Sense with an OV5640 camera (5 MP, autofocus). The firmware is a fork of Prusa's ESP32 camera firmware with autofocus, SD card fixes for the XIAO, digital zoom with virtual pan/tilt, exposure lock, and a timelapse that starts and stops with the print via PrusaLink: https://github.com/SamLovick/Prusa-Firmware-ESP32-Cam The full write-up, including what went wrong along the way: https://lovickconsulting.com/2026/11/09/prusa-connect-camera-core-one-esp32-s3-ov5640/ Print settings: Prusa CORE One, 0.6 mm nozzle, PETG, 0.20mm STRUCTURAL profile, 240 C nozzle, 85 C bed. Holder: 3 perimeters, 25% infill. The 3MF projects carry the exact settings.