Ender 3 V3 SE / KE filament wheel flat print guide remix
por bob bob en Thingiverse
The wheel from https://www.thingiverse.com/thing:6570495 requred supports to allow for flat printing due to a small brim along the center. I removed so it could be printed flat.The bearing will stick out .5mm on each side when placed, and should be held in place by friction as it is a very snug...
Licencia
Uso comercial permitidoCC BY-SA 4.0 — Atribución, compartir igual
Puedes usarlo y modificarlo dando crédito; las versiones modificadas deben compartirse con la misma licencia.
Al descargar aceptas respetar la licencia y dar crédito a bob bob.
Archivos (1)
- Categoría
- Para tu impresora
- Formatos
- STL
- Descargas
- 2
- Publicado
Sobre este modelo
The wheel from https://www.thingiverse.com/thing:6570495 requred supports to allow for flat printing due to a small brim along the center. I removed so it could be printed flat.The bearing will stick out .5mm on each side when placed, and should be held in place by friction as it is a very snug fit. All of the other parts can be printed from the original project.
Descripción original del autor, publicada en Thingiverse.
