Enchanted Vine Mason Jar Stand – 3 Tiers, 12 Jars

A three-tier stand that looks grown, not built: twisting vines and roots carry 12 Ball 8 oz wide-mouth jars – honey, spices, loose-leaf tea, candles, sweets or coffee beans. Made for a shop counter, looks just as good on a kitchen shelf. • 12 jars on 3 tiers, 4 per shelf – each jar lifts out forwards or backwards without touching the frame. • Bolted, not glued: every joint is a printed key or square pin clamped by an M4 screw from below. Comes apart flat. • 7 swappable two-colour nameplates: HONEY, SPICES, CANDLES, TEA, TREATS, COFFEE and a blank one. • 5 leaf sockets with bud caps – one peg standard, so add-on leaf packs can follow. • Every part fits a 250 × 210 mm bed. Size 578 × 371 × 242 mm. You'll need: 36 × M4×12 socket head screws (DIN 912), 36 × M4 nuts (DIN 934), a 3 mm hex key, about 1.6 kg PETG or PETG-GF plus a little gold for the nameplates. Printing: tested with a 0.6 mm nozzle, 0.3 mm layers, PETG-GF (0.4 mm works too). Supports from the build plate only, never inside key pockets, holes or sockets. Print the keys and pins first and test the fit. The 7 large roots and vines are 3MF files (same mesh, compressed). Nameplates: green body + gold inlay share the same origin – load both as one multi-part object. Assembly: two side frames and three shelves flat on the table, slide the shelves onto the left frame, push the right frame on, then tighten vine–vine → key-to-vine → shelf screws. Illustrated PDF guide in the attachments. Designed and printed by Layer 3D Studio, Pattaya.