Element Knightrunner Bed Rack
por Dylan In Motion en MyMiniFactory
These are the files for my itteration of the upTOP Overland Truss bedrack system for the Element Knightrunner RC car. It was modeled to match the true bed rack as closely as possible.
MyMiniFactory entrega los archivos a usuarios con cuenta gratuita
Licencia
Solo uso personalCC BY-NC-SA 4.0 — Atribución, no comercial, compartir igual
Uso personal dando crédito; sin fines comerciales y las modificaciones con la misma licencia.
Al descargar aceptas respetar la licencia y dar crédito a Dylan In Motion.
Archivos (3)
- Truss Mid Tall.stl STL
- Truss Mid.stl STL
- Truss Side V3.Stl STL
- Categoría
- Varios
- Formatos
- STL
- Descargas
- 767
- Publicado
Sobre este modelo
These are the files for my itteration of the upTOP Overland Truss bedrack system for the Element Knightrunner RC car. It was modeled to match the true bed rack as closely as possible.
To print this, you need to print 3 of the truss legs (in either mid, or mid-tall, your choice) laid flat on the printer, print two sets of the side panels, with one set being rotated 180 degrees so the same finish can be shown on the outsides of the bed rack. Everything attaches with M3 x 6mm hardware, which is the only thing you'll need to purchase for this.
This was originally designed just to fit the Knight Customs drop bed, but with some modification can be made to fit the standard lexan bed as well.
If you have any questions regarding this, please feel free to message me here, and I'd be glad to assist.
Descripción original del autor, publicada en MyMiniFactory.
