Egg Lamp 2.0
Update March 15, 2026: Gave additional clearance for the threads to prevent the parts from binding
Thangs entrega los archivos a usuarios con cuenta gratuita
Licencia
Revisa las condicionesModel License 10-2025
El autor usa su propia licencia. Revisa sus condiciones en la página original antes de compartir, modificar o vender.
Al descargar aceptas respetar la licencia y dar crédito a Eric P.
Archivos (3)
- Base.stl STL · 8,3 MB
- Egg.stl STL · 24,4 MB
- Light Cap.stl STL · 5,0 MB
- Categoría
- Figuras y arte
- Formatos
- STL
- Descargas
- 118
- Publicado
Sobre este modelo
Update March 15, 2026: Gave additional clearance for the threads to prevent the parts from binding
It's a lamp in the shape of an egg!
Print it! It's neat!
This utilizes a battery powered light puck that can be purchased here (https://a.co/d/00JBHZo5) or from Bambu's site (https://us.store.bambulab.com/products/remote-controlled-16-color-rgbw-puck-lights). If your light source is under 62.6mm in diameter it will fit this model.
Printing Instructions:
Egg - Infill: 0% - Walls: 2
Everything else - Do what you feel best for a clean print - Maybe use a brim
Thank you for your time and consideration on this matter.
Feel free to join my discord (https://discord.gg/tdxE35eZwF) for additional support, questions, or suggestions!
Descripción original del autor, publicada en Thangs.
