Eco/Low Support Sailor Moon Princess Kakyuu Prop

*Not there was a an issue with the lid when printed, and it was dropped - I will update the pictures when I reprint the lid STL files were built in autodesk. Sample was printed at 75% scale.

This is the eco friendly version w minimal support, NO AMS. I will be sharing soon the version printed whole with interfacing/support/etc.

3mf contains all files !!! DOES NOT INCLUDE information for printing OR SUPPORTS. YOU WILL NEED TO ADD YOUR OWN SUPPORTS. I have it default set to 0.20 High Quality BBL for PETG. I printed mine in Bambu PETG but I imagine nearly any filament will work. I used super glue but clear HIGHLY RECOMMEND CLEAR EPOXY FOR THE LEGS – Highly suggest concentric 100% infill for strength. They are slim. There may be warping at the end. Will require support, but when printed face side down, it will only require support on the legs. I printed with Octogram as the top surface pattern with the most success. Seam is done best as “aligned” to put it behind each leg. FOR THE LID - requires only support inside. Lid fits to ring, thick side to lid. I put the seam on the “back." *the sample was dropped on the floor and the top part does not usually have gap between the lid and the top bit. FOR THE BOWL - requires only support inside. Spots for attaching bowl require support and have 0.15 (0.3mm) total tolerance. if your tolerance requirements higher, I recommend editting the file. Can also print right side up, but will require support at bottom of bowl that can be difficult to pry off without interfacing. I placed the seam on the “back” also. Mine did end up with a mild distortion from pausing the toolhead to pull a string (visible as a ring near the top). So, don't be like me. Arms - Recommend printing 0.16 or smaller :) 3mf file includes half sides. stls of both half and whole sides are availabe in the files. inner arm has 0.15 mm around (0.3 total) but outward inside is 0.2 clearance (I had some issues with in not being quite deep enough with 0.15 and printed one arm 0.2 and it was much easier, although I can't tell which one now that it's assembled aha) Attach arms + parts together. :) Enjoy you princess kakyuu incense burner prop. # success.

if you use please source your file usage :) and I'd love to be tagged to see what you do with it :D Boost MeBoost me to support more shenanigans.