Echo Dot 5th Generation Outlet Mount (remix of formulagp46 model)
por Rix en Thingiverse
Made 3 tweaks: - Since the original file had an issue that the wall was too thin for printing so there was a cap between the sides and the top part, I added some material in the inside corners by rounding them. - Added a small lip inside the cable space (should be bigger). - Moved the part where...
Licencia
Uso comercial permitidoCC BY-SA 4.0 — Atribución, compartir igual
Puedes usarlo y modificarlo dando crédito; las versiones modificadas deben compartirse con la misma licencia.
Al descargar aceptas respetar la licencia y dar crédito a Rix.
Archivos (1)
- Categoría
- Hogar
- Formatos
- STL
- Descargas
- 0
- Publicado
Sobre este modelo
Made 3 tweaks: - Since the original file had an issue that the wall was too thin for printing so there was a cap between the sides and the top part, I added some material in the inside corners by rounding them. - Added a small lip inside the cable space (should be bigger). - Moved the part where the cable is in 15mm closer to the wall (so it would support against the wall) and also had to move it down due to this. Now this part rests flat against the wall and keeps it from sagging.
Descripción original del autor, publicada en Thingiverse.
