Earth Quake End Caps - RepRack Hanger for IKEA HUGAD 28mm
por JC en Printables
End caps to protect the ends of the bar, and keeps it from sliding off in Earth Quake.
Licencia
Uso comercial permitidoCC BY-SA 4.0 — Atribución, compartir igual
Puedes usarlo y modificarlo dando crédito; las versiones modificadas deben compartirse con la misma licencia.
Al descargar aceptas respetar la licencia y dar crédito a JC.
Archivos (6)
- Small-End_Cap_Assembly_v1_sliced.3mf 3MF · 1009 KB
- Small-End_Cap_Assembly_v1.stp STP · 1,0 MB
- Large-End_Cap_Assembly_v1_sliced.3mf 3MF · 1,3 MB
- Large-End_Cap_Assembly_v1.stp STP · 688 KB
- Small-End_Cap_Assembly_v1_sliced_0.4n_0.2mm_PLA_COREONE_34m.bgcode BGCODE · 1,2 MB
- Large-End_Cap_Assembly_v1_sliced_0.4n_0.2mm_PLA_COREONE_41m.bgcode BGCODE · 1,3 MB
- Categoría
- Para tu impresora
- Formatos
- 3MF, STP, BGCODE
- Descargas
- 1
- Publicado
Sobre este modelo
Earth Quake End Caps - RepRack Hanger for IKEA HUGAD 28mm I designed these end caps for a nice clean fit, and to keep the brackets and bars from separating in an Earth Quake. The screw draws the two halves together and they wedge in place against the tubing inner wall. To make one small or large end cap please use one 3mm melt-in insert and one 3mmx25mm screw per assembly.
I printed these in 3d Fuel Tough Pro PLA+. https://www.3dfuel.com/products/pro-pla-filament-lulzbot-green-1-75mm?variant=39755406770241 Print Bed Temp - 60 deg C Nozzle Temp - 245 deg C 6 bottom layers 3 vertical layers 6 top layers 25% gyroid infill.
Parts used: Qnty-1 3mm Stainless Steel melt-in insert. https://www.mcmaster.com/94459A724/
Qnty-1 3mmx25mm Stainless Button Head Screw. https://www.mcmaster.com/90910A575/
Descripción original del autor, publicada en Printables.
