Dutch Rialways Loco Number 307
por Paul Mason en Thingiverse
Dutch Rialways Loco Number 307 This was originally created in Autodesk Inventor and exported to STL format. A PDF of the drawing file was also uploaded, BUT, if not available can be requested. NOTE The actual threads on Nuts bolts etc in Inventor are cosmetic REPRESENTATION ONLY and DO NOT solid...
Licencia
Uso comercial permitidoCC BY-SA 4.0 — Atribución, compartir igual
Puedes usarlo y modificarlo dando crédito; las versiones modificadas deben compartirse con la misma licencia.
Al descargar aceptas respetar la licencia y dar crédito a Paul Mason.
Archivos (200)
- 2mm_x_10mm_PIn.ipt.stl STL · 37 KB
- 3mm_x_3mm_x15mm_Shaft_Key.ipt.stl STL · 1 KB
- 6mm_x_21mm_Pin.ipt.stl STL · 61 KB
- 7mm_x_7mm_Angled.ipt.stl STL · 1 KB
- 7mm_x_7mm_Cab_Roof_Strut.ipt.stl STL · 12 KB
- 7mm_x_7mm_x_64mm.ipt.stl STL · 1 KB
- 7mm_x_7mm_x_70-4mm.ipt.stl STL · 1 KB
- 7mm_x_7mm_x_80-8mm.ipt.stl STL · 1 KB
- 7mm_x_7mm_x_83mm.ipt.stl STL · 1 KB
- 7mm_x_7mm_x_110mm.ipt.stl STL · 1 KB
- 7mm_x_7mm_x_118mm.ipt.stl STL · 1 KB
- 7mm_x_7mm_x_194mm.ipt.stl STL · 1 KB
- 7mm_x_7mm_x_218mm.ipt.stl STL · 1 KB
- 7mm_x_7mm_x_222mm.ipt.stl STL · 1 KB
- 7mm_x_7mm_x_229mm.ipt.stl STL · 1 KB
- 7mm_x_7mm_x_247mm.ipt.stl STL · 1 KB
- 7mm_x_7mm_x_320mm.ipt.stl STL · 1 KB
- 7mm_x_7mm_x_327mm.ipt.stl STL · 1 KB
- 7mm_x_7mm_x_341mm.ipt.stl STL · 1 KB
- 7mm_x_7mm_x_354mm.ipt.stl STL · 1 KB
- 7mm_x_7mm_x_380mm.ipt.stl STL · 1 KB
- 8mm_x_3mm_x_8mm_Spacer.ipt.stl STL · 51 KB
- 73mm_Long_Hand_Rail.ipt.stl STL · 116 KB
- 80mm_Long_Hand_Rail.ipt.stl STL · 109 KB
- 145mm_Long_Hand_Rail.ipt.stl STL · 82 KB
- Adjuster_Bar.ipt.stl STL · 48 KB
- Adjuster_End.ipt.stl STL · 313 KB
- Adjuster_Handle.ipt.stl STL · 437 KB
- Adjuster_Subassembly.iam.stl STL · 1,1 MB
- Axle_Box.iam.stl STL · 707 KB
- Batterty_Box_Subassembly.iam.stl STL · 355 KB
- Battery_Box_Hinge_Bracket.ipt.stl STL · 49 KB
- Battery_Box_Hinge_Pin.ipt.stl STL · 35 KB
- Battery_Box_Hinge_Strut.ipt.stl STL · 10 KB
- Battery_Box_Lid.ipt.stl STL · 17 KB
- Battery_Box.ipt.stl STL · 1 KB
- Brake_Adjuster_Long_Bar.ipt.stl STL · 115 KB
- Brake_Adjuster_Short_Bar.ipt.stl STL · 141 KB
- Brake_Adjuster.ipt.stl STL · 54 KB
- Brake_Block.ipt.stl STL · 192 KB
- Brake_Counter_Wight_Carry_Bar.ipt.stl STL · 37 KB
- Brake_Counter_Wight_stop_Bracket.ipt.stl STL · 23 KB
- Brake_Counter_Wight_Subassembly.iam.stl STL · 594 KB
- Brake_Counter_Wight.ipt.stl STL · 278 KB
- Brake_Hanger_Bottom_Rod.ipt.stl STL · 42 KB
- Brake_Hanger_Subassembly.iam.stl STL · 333 KB
- Brake_Hanger_Top_Rod.ipt.stl STL · 37 KB
- Brake_Hnager_Plate.ipt.stl STL · 27 KB
- Brake_linkage_Gear_Subassembly.iam.stl STL · 309 KB
- Brake_Pedle_Spring_Braket.ipt.stl STL · 51 KB
- Break_Gaer.iam.stl STL · 2,4 MB
- Bronze_Bush.ipt.stl STL · 63 KB
- Buffer_Barrel.ipt.stl STL · 234 KB
- Buffer_Beam__Buffers_Subassembly.iam.stl STL · 10,0 MB
- Buffer_Beam.ipt.stl STL · 59 KB
- Buffer_Plate.ipt.stl STL · 49 KB
- Buffer_Spring.iam.stl STL · 2,8 MB
- Buffer_Subassembly.iam.stl STL · 3,3 MB
- Buffer.ipt.stl STL · 147 KB
- Cab_Door_Handle.ipt.stl STL · 179 KB
- Categoría
- Varios
- Formatos
- STL
- Descargas
- 0
- Publicado
Sobre este modelo
Dutch Rialways Loco Number 307 This was originally created in Autodesk Inventor and exported to STL format. A PDF of the drawing file was also uploaded, BUT, if not available can be requested. NOTE The actual threads on Nuts bolts etc in Inventor are cosmetic REPRESENTATION ONLY and DO NOT solid model correctly IF at all You may need to cut the treads with the appropriate tap and die
Descripción original del autor, publicada en Thingiverse.
