Dust blower

This is a practical and efficient 3D printable dust blower designed to work perfectly with a standard 60mm ball bearing fan. It is a great DIY tool for cleaning keyboards, electronics, workbenches, and hard-to-reach places. The design features a comfortable two-part handle, a focused nozzle for maximum airflow, and a secure housing for the fan, with space for a BMS board and power buttons. Included Files: Soprador_Base Cooler.stl - The main body/housing for the 60mm fan. Soprador_Bocal.stl - The front nozzle to concentrate the airflow. Soprador_Cabo1.stl & Soprador_Cabo2.stl - The two halves of the ergonomic handle. Soprador_tampa.stl - The back cover to seal the air chamber. Hardware Required: 1x 60mm Fan (Ball bearing highly recommended for better RPM and airflow). 1x BMS Board (Battery Management System) for safe charging/discharging of the lithium batteries. Push button / Power switch. Screws and nuts for assembly and securing the fan. Li-ion batteries matching your fan's voltage (typically 12V or 5V). Print Settings: Material: PLA, PETG, or ABS (PETG/ABS recommended if it gets warm). Infill: 20% - 30% for durability. Supports: Recommended for the nozzle and handle parts depending on your printing orientation.