Dumpling Dragon — No AMS

A tiny dragon guarding a very big dumpling! Closed smiling eyes, chunky paws, tucked wings and a curled tail make this a cozy little fantasy collectible for your desk or shelf. Single-piece decorative model, printed in one PLA colour. No AMS and no assembly required. The pleated dumpling is part of the sculpture, not a separate container. Size at 100%: 84.93 × 85.00 × 67.16 mm. Keep the broad flat underside on the build plate. Real print tested on a Bambu Lab H2S with a 0.4 mm nozzle using the supplied H2S settings unchanged. The photographs show that print from the combined H2S test pack. The individual H2S download retains the same mesh and model/process settings. H2S settings: 0.16 mm layers, 3 walls, 12% infill, Bambu PLA Basic, Textured PEI Plate. Automatic slim tree supports, build-plate only, 30° threshold, 0.20 mm top contact gap and 0.50 mm XY gap. Outer brim: 3 mm. Supports are required; remove gently around the paws, chin and wings. The single-model H2S slice estimates about 3 h 39 min and 61 g of PLA including supports. Actual time and material depend on your machine and filament. Included: the full-detail STL and editable Bambu Studio projects for H2S, A1 mini, P1S and X1 Carbon, all with 0.4 mm nozzles. H2S is physically confirmed; the other printer projects are software-sliced only. Open the correct project, confirm your filament and plate, and reslice before printing. Original AI-assisted design using multi-view concept imagery and Hunyuan3D reconstruction, followed by mesh inspection, underside repair and printer-profile preparation. Listing photographs were supplied by the creator as real prints.