Drying Larger Filament Spool in Food Dehydrator
por diystrument en Printables
Make your food dehydrator able to dry larger filament spools like those 3kg & 5kg jumbo spools.
Licencia
Uso comercial permitidoCC BY-SA 4.0 — Atribución, compartir igual
Puedes usarlo y modificarlo dando crédito; las versiones modificadas deben compartirse con la misma licencia.
Al descargar aceptas respetar la licencia y dar crédito a diystrument.
- Categoría
- Para tu impresora
- Formatos
- STL
- Descargas
- 3
- Publicado
Sobre este modelo
A simple modification part for normal food dehydrator so it can hold and dry larger filament spools. It basically divert the hot air so it came out much higher, allowing you to use a bucket as the drying tray. Print it with ABS or other filament that could withstand >80C. You will also need: - Small plastic bucket that's large enough for the filament spool you intend to dry. You will need to cut a large hole around the same size as the 3D printed part (~18cm hole)
- Something to cover the bucket so that the hot air is trapped inside (ie. foam sheet, cardboard, or maybe get a bucket with a lid). You will need to make some small holes on the cover so that hot humid air can escape.
Designed by Diystrumment 🇮🇩 Follow my socials IG, FB, Youtube, etc.. @Diystrument for more of my projects! Diystrument.com
Descripción original del autor, publicada en Printables.
