Drip Irrigation Ring
por Micromet en Printables
Drip irrigation ring for containerized plants. 100 mm and 120 mm. Openscad file is included.
Licencia
Solo uso personalCC BY-NC-SA 4.0 — Atribución, no comercial, compartir igual
Uso personal dando crédito; sin fines comerciales y las modificaciones con la misma licencia.
Al descargar aceptas respetar la licencia y dar crédito a Micromet.
Archivos (7)
- drip_irr_ring_100mm.stl STL · 1,4 MB
- drip_irr_ring_120mm.stl STL · 1,4 MB
- garden_peg_2.stl STL · 37 KB
- drip_irr_ring.scad SCAD · 3 KB
- garden_peg_2_0.2mm_PETG_MINI_33m.gcode GCODE · 1,2 MB
- drip_irr_ring_120mm_0.2mm_PETG_MINI_1h47m.gcode GCODE · 2,4 MB
- drip_irr_ring_100mm_0.2mm_PETG_MINI_1h28m.gcode GCODE · 2,0 MB
- Categoría
- Jardín
- Formatos
- STL, SCAD, GCODE
- Descargas
- 2,414
- Publicado
Sobre este modelo
Drip irrigation ring for containerized plants. Two sizes are provided - 100 mm and 120 mm. The Openscad file is also available for customization - you can vary the diameter of the ring, diameter of orifices, and the number of orifices/emitters per ring. Some simple garden pegs for holding down the ring are also included. Printed on a Prusa Mini with Prusament PETG (0.2mm Quality Setting) in Prusaslicer. I use the ring with a small 5-6 volt diaphram pump (370 motor) widely available on ebay and elsewhere.
Descripción original del autor, publicada en Printables.
