Draped Ghost Tissue Cover with Wavy Skirt

A draped-cloth ghost cover for a compact soft tissue pack. It has a rounded top, recessed oval eyes, flowing folds and a flared, continuous wavy skirt. The tissues sit on a separate base beneath the cover. Included files Complete default-size STL and STEP files for all 2 printed parts are included here. Each STEP is the CAD-format alternative to the matching STL, not an additional part. Dimensions and fit 220 × 140 × 125 mm (length × width × height), assembled. Measure the tissue pack before printing: the conservative usable rectangular space is 137.2 × 81.6 × 85 mm. The top dispensing slot is 100 × 26 mm. The outer size is much larger than the usable space because of the sculpted cloth shape. This default does not fit every commercial tissue box. Size options Dimensions and storage layout can be customized here:

Available adjustments include outer length, width and height, dispensing-slot length and width, base clearance and wall thickness. The base regenerates to match the shell. Check the calculated internal clear dimensions after changing parameters. The files here are the complete default-size version. Custom exports follow the pricing shown on the model page. Preview and credits The cover is a render of the actual model, not a photograph. STL and STEP contain uncolored geometry. The illustrated colors require painting or slicer coloring; no AMS/MMU-ready multicolor 3MF is included. Created for boxesmodel with AI-assisted parametric CAD development.

© 2026 boxesmodel — CC BY-NC-ND 4.0. Personal noncommercial printing; attribution required; do not distribute modified versions. Printing and assembly Print the base and cover separately. Place a suitably sized tissue pack on the base, feed the first tissue through the top slot, then lower the cover vertically over the base. The base follows the actual inside contour, offset inward by 0.50 mm. No additional hardware is required. Do not glue the two parts together if you want to refill it.

Geometry, dimensions and part completeness were checked in CAD. This model has not been sliced or physically test-printed. Review orientation, supports and fit in your slicer. No tested print profile, G-code, print time or material consumption is supplied.

Dimensions are in millimetres. Print one of each STL part; STEP files are optional CAD alternatives.

Dispensing smoothness, supports for the curved top and skirt, and physical base fit still require slicing and a real print. Do not assume the exterior dimensions equal the tissue capacity.