Double Open Cable Hook, Two Hooks Side by Side (Ø20–34 mm)

Two open hooks on one plate with slots facing opposite directions. Two bundles share one mount; the slots face opposite ways, so cables cannot move from one hook to the other. Features - Two hooks, one plate

- Slots face opposite directions

- One screw

Sizes Three sizes: two hooks of Ø20, 28 or 34 mm. - Ø20: 16 × 56 × 30 mm, 27 min on Bambu P2S, 10.9 g PETG

- Ø28: 16 × 72 × 38 mm, 35 min on Bambu P2S, 15.6 g PETG

- Ø34: 16 × 85 × 45 mm, 42 min on Bambu P2S, 19.5 g PETG

Part dimensions, print time and PETG weight per size. How it works One piece with no moving parts. Lay the cables in through the rounded slot. Fix with one countersunk wood screw Ø4 × 20 mm (two on long or multi-ring parts); the screw sits in the floor of the hook and you reach it through the slot or the access hole. Print settings - PETG recommended (ASA/ABS also fine). PLA creeps under constant load.

- 0.20 mm layers, 4 walls, 5 top and bottom layers, 40% gyroid infill

- On its side (the STL files are already rotated)

- No supports needed.

- Fasteners: countersunk wood screw Ø4 × 20 mm (not included)

Files - STL: print-ready files for every size

- 3MF: sliced Bambu Studio projects (PETG, 0.4 nozzle, 0.20 mm)

Print one size first and check the fit before printing a batch. Part of the KU cable holder series: under-desk cable holders in many sizes.