Document/Photo/Picture Frame Stand (Parametric)
por Always Be Printing en Printables
Variable Size Document/Photo/Picture Frame Stand to be printed in pairs.
Licencia
Uso comercial permitidoCC BY-SA 4.0 — Atribución, compartir igual
Puedes usarlo y modificarlo dando crédito; las versiones modificadas deben compartirse con la misma licencia.
Al descargar aceptas respetar la licencia y dar crédito a Always Be Printing.
Archivos (21)
- Frame Stand (2mm).stl STL · 7,8 MB
- Frame Stand (2.5mm).stl STL · 11,7 MB
- Frame Stand (3mm).stl STL · 16,9 MB
- Frame Stand (3.5mm).stl STL · 18,1 MB
- Frame Stand (4mm).stl STL · 18,7 MB
- Frame Stand (4.5mm).stl STL · 19,1 MB
- Frame Stand (5mm).stl STL · 19,6 MB
- Frame Stand (5.5mm).stl STL · 20,1 MB
- Frame Stand (6mm).stl STL · 20,4 MB
- Frame Stand (6.5mm).stl STL · 20,6 MB
- Frame Stand (7mm).stl STL · 20,7 MB
- Frame Stand (7.5mm).stl STL · 20,8 MB
- Frame Stand (8mm).stl STL · 20,8 MB
- Frame Stand (8.5mm).stl STL · 20,8 MB
- Frame Stand (9mm).stl STL · 20,8 MB
- Frame Stand (9.5mm).stl STL · 20,8 MB
- Frame Stand (10mm).stl STL · 20,8 MB
- Frame Stand (10.5mm).stl STL · 20,8 MB
- Frame Stand (11mm).stl STL · 20,8 MB
- Frame Stand (11.5mm).stl STL · 20,8 MB
- Frame Stand (12mm).stl STL · 20,8 MB
- Categoría
- Hogar
- Formatos
- STL
- Descargas
- 1,023
- Publicado
Sobre este modelo
I designed this to support some document frames which are 9mm wide as well as a lithophane which is 4mm wide. I've included STLs for 2mm through 12mm in .5mm increments with tilt angles set 1 degree less steep for each 4mm of increased frame size.
If you need different sizes or angles or you just want to tweak the design, you can find my original, fully parametric OnShape document for the model at the following link: https://cad.onshape.com/documents/a388b33a8802dfee26b89265/w/51fddbb5c2736a80b05ca88d/e/f4d6c23147c62e7180d8af12
Cheers!
&
Always Be Printing
Descripción original del autor, publicada en Printables.
