DIY RC Excavator
por ProfessorBoots en Printables
This is a fully functional 3D Printable RC Excavator with a thumb!
Licencia
Solo uso personalCC BY-NC-SA 4.0 — Atribución, no comercial, compartir igual
Uso personal dando crédito; sin fines comerciales y las modificaciones con la misma licencia.
Al descargar aceptas respetar la licencia y dar crédito a ProfessorBoots.
Archivos (92)
- 1.) Main Color Print Group.stl STL · 1,6 MB
- 2.) Secondary Color Print Group.stl STL · 2,0 MB
- 3.) Secondary Color Print Group Pt2.stl STL · 2,4 MB
- 4.) TPU Print Group(Print Tracks Seperate).stl STL · 323 KB
- Track.stl STL · 456 KB
- 1.) Drive Gear.stl STL · 320 KB
- 2.) Front Drive Gear(No Motor).stl STL · 59 KB
- 3.) Left Track Support.stl STL · 252 KB
- 4.) Right Track Support.stl STL · 252 KB
- 5.) Track Motor Lock.stl STL · 14 KB
- 6.) Lower Track Roller.stl STL · 127 KB
- 7.) Upper Track Roller.stl STL · 122 KB
- 8.) Lower Frame.stl STL · 323 KB
- 9.) Main Boom Holder.stl STL · 168 KB
- 10.) Pinion Gear for Excavator rotation.stl STL · 129 KB
- 10.5.) Swivel Lock.stl STL · 110 KB
- 11.) Lower body.stl STL · 293 KB
- 12.) Motor Holder.stl STL · 68 KB
- 13.) Motor Holder Lock.stl STL · 28 KB
- 14.) Main Boom Push Rod.stl STL · 78 KB
- 15.) Dipper and Bucket Push rod.stl STL · 87 KB
- 16.) Thumb Push Rod.stl STL · 43 KB
- 17.) Main Boom.stl STL · 248 KB
- 18.) Dipper.stl STL · 207 KB
- 19.) Attacher.stl STL · 156 KB
- 20.) Bucket.stl STL · 57 KB
- 21.) Bucket Swing Arm.stl STL · 74 KB
- 22.) Bucket Push Link.stl STL · 87 KB
- 23.) Thumb.stl STL · 50 KB
- 24.) Cab.stl STL · 283 KB
- 25.) Main Boom Rotator Cuff.stl STL · 79 KB
- 26.) Rear Cover Swivel.stl STL · 63 KB
- 27.) Rear Cover.stl STL · 742 KB
- 28.) Step.stl STL · 46 KB
- 29.) Engine Cover.stl STL · 56 KB
- 30.) Exhaust.stl STL · 87 KB
- 31.) Guardrail.stl STL · 60 KB
- 32.) Step Mat.stl STL · 94 KB
- 33.) Rear Cover Mat.stl STL · 82 KB
- 34.) Track.stl STL · 456 KB
- 1.) Drive Gear.step STEP · 258 KB
- 2.) Front Drive Gear(No Motor).step STEP · 235 KB
- 3.) Left Track Support.step STEP · 350 KB
- 4.) Right Track Support.step STEP · 350 KB
- 5.) Track Motor Lock.step STEP · 39 KB
- 6.) Lower Track Roller.step STEP · 37 KB
- 7.) Upper Track Roller.step STEP · 38 KB
- 8.) Lower Frame.step STEP · 817 KB
- 9.) Main Boom Holder.step STEP · 203 KB
- 10.) Pinion Gear for Excavator rotation.step STEP · 174 KB
- 10.5.) Swivel Lock.step STEP · 50 KB
- 11.) Lower body.step STEP · 337 KB
- 12.) Motor Holder.step STEP · 99 KB
- 13.) Motor Holder Lock.step STEP · 62 KB
- 14.) Main Boom Push Rod.step STEP · 229 KB
- 15.) Dipper and Bucket Push rod.step STEP · 267 KB
- 16.) Thumb Push Rod.step STEP · 114 KB
- 17.) Main Boom.step STEP · 874 KB
- 18.) Dipper.step STEP · 410 KB
- 20.) Bucket.step STEP · 193 KB
- Categoría
- Varios
- Formatos
- STL, STEP
- Descargas
- 14,107
- Publicado
Sobre este modelo
This is a fully functional RC excavator that takes advantage of the wonderous capabilties of 3D printers. It uses micro robotic development parts such as an ESP32 development board that can be programmed via the Arduino IDE, this model specifically can then be connected to a ps3 controller. If you'd like to support the channel and fund the development of these mini DIY RC projects consider becoming a ProfessorBoots Workshop member which will give you access to the PCB files for this model as well as a step by step guide on sourcing the PCB's/Electronics and uploading the code to the development board. As well as pretty much everything else you may need to know in order to build your very own 3D Printed Mini Excavator. ProfessorBoots Workshop: https://professorboots.com/products/professorboots-workshop-pass Youtube Video:
Descripción original del autor, publicada en Printables.
