Disney Interchangeable Headband and Ears
por nx3creationsllc en Cults3D
First I must give credit where credit is due. Thanks to all the makers out there and the beautiful designs that inspired this. Big thanks to NINJATILL from whom we took alot of inspiration from. We hope that you like the remix/redesign.
Cults3D entrega los archivos a usuarios con cuenta gratuita
Licencia
Uso comercial permitidoPuedes imprimirlo, modificarlo y venderlo dando crédito al autor.
Al descargar aceptas respetar la licencia y dar crédito a nx3creationsllc.
Archivos (45)
- Alien_Toy_Story_Ear_Nx3CreationsLLC.stl STL
- Alien_Toy_Story_Ear_Nx3CreationsLLC.stl STL
- Belle_Ear_Nx3CreationsLLC.stl STL
- Belle_Ear_Nx3CreationsLLC.stl STL
- Belle_v1.stl STL
- Buzz_and_Woody_Ear_Nx3CreationsLLC.stl STL
- Buzz_and_Woody_Ear_Nx3CreationsLLC.stl STL
- Castle_in_Mickie_Ear_Nx3CreationsLLC.stl STL
- Castle_in_Mickie_Ear_Nx3CreationsLLC.stl STL
- Castle_insdie_Mickey_Head_v1.stl STL
- Disney_Headband_Youth_Nx3CreationsLLC.stl STL
- Disney_Headband_Youth_Nx3CreationsLLC.stl STL
- Disney_Headband_Youth_Nx3CreationsLLC.stl STL
- Disney_Headband_adult_Nx3CreationsLLC.stl STL
- Disney_Headband_adult_Nx3CreationsLLC.stl STL
- Disney_Headband_adult_Nx3CreationsLLC.stl STL
- Dumbo_Ear_Nx3CreationsLLC.stl STL
- Dumbo_Ear_Nx3CreationsLLC.stl STL
- Hakuna_Matata_Ear_Nx3CreationsLLC.stl STL
- Hakuna_Matata_Ear_Nx3CreationsLLC.stl STL
- Mickey_Fantasia_Ear_Nx3CreationsLLC.stl STL
- Mickey_Fantasia_Ear_Nx3CreationsLLC.stl STL
- Mike_Monsters_Inc_Ear_Nx3CreationsLLC.stl STL
- Mike_Monsters_Inc_Ear_Nx3CreationsLLC.stl STL
- PeterPan_v1.stl STL
- Peter_Pan_Ear_Nx3CreationsLLC.stl STL
- Peter_Pan_Ear_Nx3CreationsLLC.stl STL
- Piglet_Ear_Nx3CreationsLLC.stl STL
- Piglet_Ear_Nx3CreationsLLC.stl STL
- Pooh_Ear_Nx3CreationsLLC.stl STL
- Pooh_Ear_Nx3CreationsLLC.stl STL
- Stitch_Ear_Nx3CreationsLLC.stl STL
- Stitch_Ear_Nx3CreationsLLC.stl STL
- Sully_Monsters_Inc_Ear_Nx3CreationsLLC.stl STL
- Sully_Monsters_Inc_Ear_Nx3CreationsLLC.stl STL
- Tinkerbell_Ear_Nx3CreationsLLC.stl STL
- Tinkerbell_Ear_Nx3CreationsLLC.stl STL
- buzz_and_woody.stl STL
- dumbo_v1.stl STL
- hakuna_matata_v1.stl STL
- mickie_fantasia_v0.stl STL
- mike_v2.stl STL
- piglet_v4.stl STL
- pooh.stl STL
- tink_v1.stl STL
- Categoría
- Cosplay y props
- Formatos
- STL
- Descargas
- 1,700
- Publicado
Sobre este modelo
First I must give credit where credit is due. Thanks to all the makers out there and the beautiful designs that inspired this. Big thanks to NINJATILL from whom we took alot of inspiration from. We hope that you like the remix/redesign.
Here you will find a brand new design on the ever popular Disney headband/ears.
We have made several mods to come up with this re-design.
The first thing you will find is that we have created our own headband. These will come in two sizes. One is for youth and will squeeze a little tighter to the head to give it more grip on a smaller head. The other is adult sized for obvious reasons. My wife can wear either, but prefers the adult as it doesn't fit as tight, but still holds in place.
Second is that we have eliminated the need for glue!!!!! After gluing my fingers together on multiple occations, I had to change this. Now the base for the ears is made into the base. This also helps cut down on overall height and weight.
Third change is going to be on the ears. We have redesigned these to fit our headbands. They are 10mm thick around the edges and 2.5mm thick on the silhouette. Again this is a weight reduction issue.
There are several ears that we have designed here and there are many more to come. Please check back often as we add more designs and potentially fix any issues that may come to our attention.
The bases and ears have been designed to use 3mm x 6mm magnets. This allows for quick change and NO GLUE!! The magnets will press fit into both parts and should not require any glue. If you find that they are not staying in place a small drop of CA or Super glue should do the trick.
WARNING: Magnets pose a danger to small children.
I will provide links below for the materials used to create these parts. If you have any questions or comments please feel free to reach out to us here or on any social media @Nx3CreationsLLC
This came from a passion that my 11 year old daughter had to create her own business. You may not find much on our social accounts right now as they are all just getting set up, but we will push content to the as soon as possible.
Enjoy!!!
3mm x 6mm Magnets
WARNING: Magnets pose a danger to small children.
https://www.amazon.com/dp/B07KZQGWNN?th=1&linkCode=sl1&tag=nx3creationsl-20&linkId=c983002032c8268cc84a0e4209db53e9&language=en_US&ref_=as_li_ss_tl
Printer
https://www.amazon.com/dp/B07KZQGWNN?th=1&linkCode=sl1&tag=nx3creationsl-20&linkId=c983002032c8268cc84a0e4209db53e9&language=en_US&ref_=as_li_ss_tl
CRTouch Bed Leveler
https://www.amazon.com/dp/B07KZQGWNN?th=1&linkCode=sl1&tag=nx3creationsl-20&linkId=c983002032c8268cc84a0e4209db53e9&language=en_US&ref_=as_li_ss_tl
PLA Filament
https://www.amazon.com/dp/B07KZQGWNN?th=1&linkCode=sl1&tag=nx3creationsl-20&linkId=c983002032c8268cc84a0e4209db53e9&language=en_US&ref_=as_li_ss_tl
We will be releasing new ears to add to the headband in the future.
Come back often to see new designs added.
Descripción original del autor, publicada en Cults3D.
