Desk Caddy - 3 Textures | H3C Desk Collection

The everything-organizer. A tall back row holds pens, markers and scissors. A low front row has a small-parts tray, a memo-cube bay and a phone slot. It sorts a whole desk in one footprint and still fits a 180 mm bed. Why it is different - Back row: 3 wells about 103 mm deep for pens, markers, scissors and rulers.

- Front row: small-parts tray (26 mm deep), memo bay that fits a 38 mm memo cube (40 mm deep), and a 78 x 13 mm phone slot that leans back 18 degrees.

- Fits on an A1 mini (172 x 100 mm footprint).

- Three textures, one family: DUNE (sand ripples), HIVE (hexagons that shrink toward the rim) and NINE (architectural flutes). The same look as the H3C Purge Bin.

- NINE TOOLS badge: an engraved emblem with nine dots for the nine PrintTools. Print it in one colour, or as a flush 2-colour inlay on the H3C.

- Seamless wrap: every texture is tuned so the pattern closes perfectly around the back, with no seam line.

- Support-free and plate-ready: overhangs are 45 degrees or less (plus a few short bridges), and every profile slices with no warnings.

What's included - 3MF profiles for DUNE, HIVE and NINE: H3C 2 colours (inlay) and 1 colour all printers

- STL per texture (body + inlay)

Size - Size: 172 x 100 x 106 mm

- Phone slot: 78 x 13 mm, 30 mm deep, 18 degrees back

- Weight: about 273-285 g PLA

How to use - Print upright, no supports.

- The phone slot fits phones up to about 12 mm thick with a case.

Print settings - Material: PLA (Bambu PLA Basic). 0.4 mm nozzle, 0.20 mm layers, 3 walls, 15% infill, Textured PEI plate.

- No supports. Seam on the back.

- 2 colours: the inlay is a separate part already assigned to filament 2. The time includes the prime tower.

- The all-printers profile is built on the Bambu Lab A1 mini (180 mm), so it opens on any Bambu printer and fits small beds.

Print profiles (sliced in Bambu Studio) - DUNE - 2 colours (NINE TOOLS inlay) - H3C - PLA: 6.03 h, 285 + 3.5 g

- DUNE - 1 colour - all printers - PLA: 7.40 h, 279 g

- HIVE - 2 colours (NINE TOOLS inlay) - H3C - PLA: 7.12 h, 279 + 3.5 g

- HIVE - 1 colour - all printers - PLA: 8.77 h, 273 g

- NINE - 2 colours (NINE TOOLS inlay) - H3C - PLA: 7.92 h, 279 + 3.5 g

- NINE - 1 colour - all printers - PLA: 8.94 h, 273 g

Files STLs in print orientation (Z up): <SKIN>_body.stl works alone as a 1-colour print with an engraved badge; <SKIN>_inlay.stl is the optional 2nd colour that fills the engraving. For 2 colours, load both together and answer Yes to 'load as a single object with multiple parts', then set the inlay to filament 2. The body STLs are zipped (about 10-20 MB each unzipped). The collection Part of the NINE TOOLS H3C Desk Collection: pen cup, desk bin, catch-all tray, cable dock + clips, phone stand, desk caddy and headphone stand, all in the same three textures. If this tidies up your desk, a Like or a Make with a photo really helps. Tell me which texture you printed! Gallery images are photorealistic renders made from these exact print files. Original design. Not affiliated with Bambu Lab.