Desk Bin - 3 Textures | H3C Desk Collection

A small desk bin for scraps, purge, supports and paper. It shares the silhouette of the H3C Purge Bin: the rim slopes from 160 mm at the back down to 138 mm at the front, so you can throw things in from your chair. Why it is different - Sloped rim (160 mm back, 138 mm front): easy to aim at, hides what is inside from the front.

- About 1.6 L: big enough for a day of support material and paper, small enough for the desk.

- Fits on an A1 mini bed (160 mm tall).

- Three textures, one family: DUNE (sand ripples), HIVE (hexagons that shrink toward the rim) and NINE (architectural flutes). The same look as the H3C Purge Bin.

- NINE TOOLS badge: an engraved emblem with nine dots for the nine PrintTools. Print it in one colour, or as a flush 2-colour inlay on the H3C.

- Seamless wrap: every texture is tuned so the pattern closes perfectly around the back, with no seam line.

- Support-free and plate-ready: overhangs are 45 degrees or less (plus a few short bridges), and every profile slices with no warnings.

What's included - 3MF profiles for DUNE, HIVE and NINE: H3C 2 colours (inlay), H3C 1 colour, 1 colour all printers

- Printables: STL per texture (body + inlay)

Size - Size: 137 x 104 x 160 mm

- Capacity: about 1.6 L

- Weight: about 180-195 g PLA

How to use - Print upright, no supports.

- Set it within reach of your printer and your chair.

Print settings - Material: PLA (Bambu PLA Basic). 0.4 mm nozzle, 0.20 mm layers, 3 walls, 15% infill, Textured PEI plate.

- No supports. Seam on the back.

- 2 colours: the inlay is a separate part already assigned to filament 2. The time includes the prime tower.

- The all-printers profile is built on the Bambu Lab A1 mini (180 mm), so it opens on any Bambu printer and fits small beds.

Print profiles (sliced in Bambu Studio) - DUNE - 2 colours (NINE TOOLS inlay) - H3C - PLA: 4.87 h, 207 + 4.8 g

- DUNE - 1 colour - H3C - PLA: 4.71 h, 192 g

- DUNE - 1 colour - all printers - PLA: 5.77 h, 192 g

- HIVE - 2 colours (NINE TOOLS inlay) - H3C - PLA: 6.02 h, 194 + 4.8 g

- HIVE - 1 colour - H3C - PLA: 5.87 h, 179 g

- HIVE - 1 colour - all printers - PLA: 7.26 h, 180 g

- NINE - 2 colours (NINE TOOLS inlay) - H3C - PLA: 8.52 h, 198 + 4.8 g

- NINE - 1 colour - H3C - PLA: 8.38 h, 184 g

- NINE - 1 colour - all printers - PLA: 8.97 h, 184 g

Files STLs in print orientation (Z up): <SKIN>_body.stl works alone as a 1-colour print with an engraved badge; <SKIN>_inlay.stl is the optional 2nd colour that fills the engraving. For 2 colours, load both together and answer Yes to 'load as a single object with multiple parts', then set the inlay to filament 2. The collection Part of the NINE TOOLS H3C Desk Collection: pen cup, desk bin, catch-all tray, cable dock + clips, phone stand, desk caddy and headphone stand, all in the same three textures. If this tidies up your desk, a Boost or a Make with a photo really helps. Tell me which texture you printed! Gallery images are photorealistic renders made from these exact print files. Original design. Not affiliated with Bambu Lab.