Decorative Sword-Wall Mount

There are two sets of wall mount: the first has a distance of 77mms between the two arms of the bracket, and the second has a distance of 90mms between the arms. Printing: The pieces are in the correct orientation for printing, and do not require added supports. The cover has a support on the underside that can be easily popped out after the print has cooled. Mounting: The brackets can be mounted to the wall by either screws, or with two medium sized Command Replacement Strips. After the bracket is attached the wall, the cover simply slides on over it. I do not recommend hanging anything heavier than 5lbs on the brackets, although, they should be able to support at least 10lbs without too much warping. If using Command Strips, follow the weight recommendations(2lbs per strip). If you have any questions, let me know!