DaveMakes Modular Building Set – Closet and Storage

The DaveMakes Modular Building Set includes a range of modules that you can use to build everything from customized dollhouses to tabletop gaming architecture and terrain. Access compatible modules here (https://than.gs/c/383034).

Stay tuned for more expansion sets!

This download includes the closet and storage bins. See print and assembly details below and in this video (https://youtu.be/UiALH64cnOY).

These models are scaled at 1:50. Files can be scaled in your slicer to print at whatever scale you need. Simply take 50 and divide by your target scale to get the factor to use in your slicer. For example, if you want to print models at 1:100 scale divide 50 by 100 to get .5. Scale your models in the slicer by a factor of .5

Remember that as you scale the print down, the fit between pieces will become tighter. You can offset this by reducing your flow rate a bit.

Assembly:

This section describes specific consideration for printing the pieces included in this download. You can also view printing and assembly instructions here (https://youtu.be/UiALH64cnOY).

The pieces will hold together on their own, use glue if you need a more permanent assembly.

Closet:

Print the “Closet” and “Closet Rod” as oriented. Print as many “Clothes Hangers” as you need. Hangers can be printed in either standard or spiralized mode.

Storage Shelves:

Select and print the length of “Storage Shelf” that you need. The “Bin” file is designed to print in “Spiralized” or “Vase” mode. The handles are formed by the overhangs on each side of the bin. Print lots!