Dancing Skeleton (fixed motor, no gears)
por JokeFox en Printables
This is the skeleton without gears, the motor is directly attached.
Licencia
Uso comercial permitidoCC BY-SA 4.0 — Atribución, compartir igual
Puedes usarlo y modificarlo dando crédito; las versiones modificadas deben compartirse con la misma licencia.
Al descargar aceptas respetar la licencia y dar crédito a JokeFox.
Archivos (12)
- NEW HIP ROTATE (need 2).stl STL · 43 KB
- NEW ARM UPPER (need 2).stl STL · 80 KB
- NEW CHEST ROTATE.stl STL · 209 KB
- NEW CIRCLE.stl STL · 81 KB
- NEW HEAD 1.stl STL · 1,6 MB
- NEW LEGS.stl STL · 725 KB
- NEW ARM L.stl STL · 3,5 MB
- NEW ARM R.stl STL · 3,5 MB
- NEW CHEST.stl STL · 5,1 MB
- NEW BACK.stl STL · 3,0 MB
- NEW HEAD 2.stl STL · 9,1 MB
- NEW LID2.stl STL · 52 KB
- Categoría
- Varios
- Formatos
- STL
- Descargas
- 2
- Publicado
Sobre este modelo
Uses TT yellow motor. DO NOT supply power from usb unless stepping down to ~3v, two AA or AAA batteries in series work perfectly You will need two M3 bolts, I used 30mm and two nuts. Go threw the back, pass through the motor and the lid.
Print the heads with 10-15% infill, 2 bottom and lower layers and 2 walls.
I remixed this because there was one like it and it has vanished. So im giving it back to the people. remixed from a highly remixed design so it wont disappear on you.
special shout out to this guy for making this reference model of the TT motor. You made my life so easy with this. https://www.printables.com/model/1336089-tt-motor-reference
if you have any issues leave a comment and please share, remix and enjoy this, how it was supposed to be.
This print was Remix by JokeFox, Straight from the oven of Spite :)
Descripción original del autor, publicada en Printables.
